Smeg GCO90XG manual Introduction, The Plate On The Casing Must Not Be Removed

Contents Contents NEVER UNPLUG BY PULLING ON THE CABLE Introduction1. INSTRUCTIONS FOR SAFE AND PROPER USE THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USETHE PLATE ON THE CASING MUST NOT BE REMOVED Instructions for the installer 2. POSITIONING OF HOB2.1.1 Attachment to support structure Instructions for the installer 3. ELECTRICAL CONNECTION 4. GAS CONNECTION 4.1 Connection to LPG 4.2 Ventilation of rooms4.3 Discharge of combustion products 5.1 Removing the hob 5. ADAPTATION TO DIFFERENT TYPES OF GASRated BurnerheatingLPG - G30/G31 28/37 mbar capacity kW 5.2 Regulation for LPG5.3 Regulation for natural gas 5.4 Regulation for town gasheating Referred to distance “X” in mm 5.5 Regulation of primary air6. FINAL OPERATIONS 6.1 Regulation of minimum for natural gas6.2 Regulation of minimum for LPG BURNERS 6.3 Arrangement of burners on hob6.4 Lubrication of gas taps This must be done by a qualified technicianInstructions for the user 7. USING THE HOB7.2 Practical advice for using the burners 7.4 Using a griddle plate7.3 Diameter of containers 7.5.2 Using the electric elements 7.5 Electric elements7.5.1 Turning on electric elements To use correctly remember to 8.1.1 Regular daily cleaning of the hob 8. CLEANING AND MAINTENANCENever use a steam jet to clean the appliance Before any intervention, disconnect the power supply of the device8.2.3 The cover 8.2.1 Ignition plugs and safety devicesCAUTION do not wash these components in a dishwasher 8.2.2 The electric element