Smeg GCO90XG manual Electrical Connection, Instructions for the installer

Contents Contents THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE Introduction1. INSTRUCTIONS FOR SAFE AND PROPER USE NEVER UNPLUG BY PULLING ON THE CABLETHE PLATE ON THE CASING MUST NOT BE REMOVED Instructions for the installer 2. POSITIONING OF HOB2.1.1 Attachment to support structure Instructions for the installer 3. ELECTRICAL CONNECTION 4. GAS CONNECTION 4.1 Connection to LPG 4.2 Ventilation of rooms4.3 Discharge of combustion products 5. ADAPTATION TO DIFFERENT TYPES OF GAS 5.1 Removing the hob5.2 Regulation for LPG Rated BurnerheatingLPG - G30/G31 28/37 mbar capacity kW5.3 Regulation for natural gas 5.4 Regulation for town gasheating 5.5 Regulation of primary air Referred to distance “X” in mm6. FINAL OPERATIONS 6.1 Regulation of minimum for natural gas6.2 Regulation of minimum for LPG This must be done by a qualified technician 6.3 Arrangement of burners on hob6.4 Lubrication of gas taps BURNERS7. USING THE HOB Instructions for the user7.2 Practical advice for using the burners 7.4 Using a griddle plate7.3 Diameter of containers 7.5.2 Using the electric elements 7.5 Electric elements7.5.1 Turning on electric elements To use correctly remember to Before any intervention, disconnect the power supply of the device 8. CLEANING AND MAINTENANCENever use a steam jet to clean the appliance 8.1.1 Regular daily cleaning of the hob8.2.2 The electric element 8.2.1 Ignition plugs and safety devicesCAUTION do not wash these components in a dishwasher 8.2.3 The cover