Smeg GCO90XG Instructions for the installer, Regulation for natural gas, Regulation for town gas

Contents Contents NEVER UNPLUG BY PULLING ON THE CABLE Introduction1. INSTRUCTIONS FOR SAFE AND PROPER USE THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USETHE PLATE ON THE CASING MUST NOT BE REMOVED 2.1.1 Attachment to support structure Instructions for the installer2. POSITIONING OF HOB Instructions for the installer 3. ELECTRICAL CONNECTION 4. GAS CONNECTION 4.3 Discharge of combustion products 4.1 Connection to LPG4.2 Ventilation of rooms 5.1 Removing the hob 5. ADAPTATION TO DIFFERENT TYPES OF GASRated BurnerheatingLPG - G30/G31 28/37 mbar capacity kW 5.2 Regulation for LPGheating 5.3 Regulation for natural gas5.4 Regulation for town gas Referred to distance “X” in mm 5.5 Regulation of primary air6.2 Regulation of minimum for LPG 6. FINAL OPERATIONS6.1 Regulation of minimum for natural gas BURNERS 6.3 Arrangement of burners on hob6.4 Lubrication of gas taps This must be done by a qualified technicianInstructions for the user 7. USING THE HOB7.3 Diameter of containers 7.2 Practical advice for using the burners7.4 Using a griddle plate 7.5.1 Turning on electric elements 7.5.2 Using the electric elements7.5 Electric elements To use correctly remember to 8.1.1 Regular daily cleaning of the hob 8. CLEANING AND MAINTENANCENever use a steam jet to clean the appliance Before any intervention, disconnect the power supply of the device8.2.3 The cover 8.2.1 Ignition plugs and safety devicesCAUTION do not wash these components in a dishwasher 8.2.2 The electric element