Smeg GCO90XG manual Instructions for the installer

Page 5

Manual background

Instructions for the installer

In case of installation on a hollow compartment with doors, a separating panel has to be placed under the hob. Keep a minimum distance of 10

mmbetween the bottom of the unit and the panel surface. The panel has to be easily removable to allow access in the event of technical service.

(Only for 90 cm models) Installation of an oven without cooling fan underneath the hob is forbidden.

26

Image 5

Contents Contents 1. INSTRUCTIONS FOR SAFE AND PROPER USE IntroductionTHE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE NEVER UNPLUG BY PULLING ON THE CABLETHE PLATE ON THE CASING MUST NOT BE REMOVED 2.1.1 Attachment to support structure Instructions for the installer2. POSITIONING OF HOB Instructions for the installer 3. ELECTRICAL CONNECTION 4. GAS CONNECTION 4.3 Discharge of combustion products 4.1 Connection to LPG4.2 Ventilation of rooms 5.1 Removing the hob 5. ADAPTATION TO DIFFERENT TYPES OF GASRated BurnerheatingLPG - G30/G31 28/37 mbar capacity kW 5.2 Regulation for LPGheating 5.3 Regulation for natural gas5.4 Regulation for town gas Referred to distance “X” in mm 5.5 Regulation of primary air6.2 Regulation of minimum for LPG 6. FINAL OPERATIONS6.1 Regulation of minimum for natural gas 6.4 Lubrication of gas taps 6.3 Arrangement of burners on hobThis must be done by a qualified technician BURNERSInstructions for the user 7. USING THE HOB7.3 Diameter of containers 7.2 Practical advice for using the burners7.4 Using a griddle plate 7.5.1 Turning on electric elements 7.5.2 Using the electric elements7.5 Electric elements To use correctly remember to Never use a steam jet to clean the appliance 8. CLEANING AND MAINTENANCEBefore any intervention, disconnect the power supply of the device 8.1.1 Regular daily cleaning of the hobCAUTION do not wash these components in a dishwasher 8.2.1 Ignition plugs and safety devices8.2.2 The electric element 8.2.3 The cover