Smeg GCO90XG manual Instructions for the installer, Arrangement of burners on hob, Burners

Page 14

6.3 Arrangement of burners on hob

Instructions for the installer

6.3 Arrangement of burners on hob

BURNERS

1 Auxiliary

2Semi-rapid

3Rapid

4 Ultra rapid

5Double crown

6Fish pan

6.4 Lubrication of gas taps

After a while, the gas tap may become hard to turn or lock. If this happens, it has to be cleaned inside and re-greased.

This must be done by a qualified technician.

35

Image 14

Contents Contents THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE Introduction1. INSTRUCTIONS FOR SAFE AND PROPER USE NEVER UNPLUG BY PULLING ON THE CABLETHE PLATE ON THE CASING MUST NOT BE REMOVED 2.1.1 Attachment to support structure Instructions for the installer2. POSITIONING OF HOB Instructions for the installer 3. ELECTRICAL CONNECTION 4. GAS CONNECTION 4.3 Discharge of combustion products 4.1 Connection to LPG4.2 Ventilation of rooms 5. ADAPTATION TO DIFFERENT TYPES OF GAS 5.1 Removing the hob5.2 Regulation for LPG Rated BurnerheatingLPG - G30/G31 28/37 mbar capacity kWheating 5.3 Regulation for natural gas5.4 Regulation for town gas 5.5 Regulation of primary air Referred to distance “X” in mm6.2 Regulation of minimum for LPG 6. FINAL OPERATIONS6.1 Regulation of minimum for natural gas This must be done by a qualified technician 6.3 Arrangement of burners on hob6.4 Lubrication of gas taps BURNERS7. USING THE HOB Instructions for the user7.3 Diameter of containers 7.2 Practical advice for using the burners7.4 Using a griddle plate 7.5.1 Turning on electric elements 7.5.2 Using the electric elements7.5 Electric elements To use correctly remember to Before any intervention, disconnect the power supply of the device 8. CLEANING AND MAINTENANCENever use a steam jet to clean the appliance 8.1.1 Regular daily cleaning of the hob8.2.2 The electric element 8.2.1 Ignition plugs and safety devicesCAUTION do not wash these components in a dishwasher 8.2.3 The cover