Smeg CE6IPX manual Extraordinary Maintenance, Changing the light bulb, Removing the door

Page 26

Instructions for the User

14. EXTRAORDINARY MAINTENANCE

The oven may require extraordinary maintenance or replacement of parts subject to wear such as seals, bulbs, and so on. The following instructions describe how to carry out these minor maintenance operations.

Before performing any operations requiring access to powered parts, switch off the power supply to the appliance.

14.1 Changing the light bulb

Remove the protective cover A by unscrewing it counterclockwise; replace the bulb B with another of the same type (25 W). Re-fit the bulb protector A.

Use only oven bulbs (T 500°C).

14.2 Removing the door

Open the door completely and, using a small- ended screwdriver rotate the hinges A completely.

Grasp the door on the sides with both hands near the hinges, close it forming an angle of around 45° and remove it.

To reinsert it, groove B must be inserted with the oven's frame, putting hinge A in the position illustrated in the figure and pushing it all the way in with one push using a screwdriver or equivalent tool until you feel it click.

14.3 Removing the door seal

To permit thorough cleaning of the oven, the seal may be removed.

Before removing the seal, take off the door as described above. Once the door has been taken off, lift the tabs under the seal as shown in the figure.

57

Image 26

Contents Index Precautions for USE Plate Must not be RemovedRecycling Instructions OUR Environment Policy Never Attempt to Repair the Appliance Yourself Safety PrecautionsIntended USE Getting to Know Your Ovenl General DescriptionAccessories available on request Before InstallationAvailable Accessories Using the Rotisserie ROD when present Description of the Controls on the Front Panel HOB Control Knob Main Oven Temperature Selection Knob PT1Main Oven Functions Selection Knob PT2 First use Using the Main OvenSetting the current time Selecting a functionModifying the data set Programmed cooking procedures10.4.1Semiautomatic cooking 10.4.2Automatic cookingAutomatic cooking with selection of a recipe Cooking with selection of a recipeModifying the data set during cooking Making permanent changes to a recipe Table of predefined recipes Secondary menu Cooking in the Oven Description of the selected functionsHints on Using the Accessories Cooking Hints and TipsCooking tables Using the HOB Cooking zones180 mm Zone number Zone Diameter Power consumed 145 mmTotal power consumed 210 mmResidual heat Cookware detector signalOperation Activating temperature Cooking hob lock-outThermal protection glass-ceramic hob Keep Warm FunctionCleaning and Maintenance Pyrolysis automatic oven cleaning on some models only Before starting the automatic cleaning cycleSetting the cleaning cycle Removing the door Extraordinary MaintenanceChanging the light bulb Removing the door sealOven does not heat up What to do ifOven display is completely off Controls do not respondInstalling the Appliance Electrical connectionPositioning and levelling the appliance depending on model