Taylor 430 TORQUE manual Operating Procedures Model 430 Torque

Page 16

Holding the beater securely, slide the beater into the freezing cylinder and align the hole at the rear of the beater with the flats on the end of the drive shaft.

Slide the beater the remainder of the way into the freezing cylinder and over the end of the drive shaft. The beater assembly will not protrude beyond the front of the freezing cylinder.

Figure 7

Step 3

Install the white plastic guide bearing on the short end of the torque rotor. Slide the o--ring into the groove on the long end of the torque rotor and lubricate the o--ring. Do not lubricate the guide bearing.

Figure 9

Step 5

Assemble the freezer door with the “Ice Buster” (door spout clearing device). To assemble the door with the ice buster, install the o--rings on the draw valve and lubricate.

Figure 10

Insert the draw valve into the door, leaving approximately 1/2” of the valve sticking out the top of the door.

Figure 8

 

Step 4

 

Insert the torque rotor end with the guide bearing into

 

the pilot hole in the center of the drive shaft. The hole

 

in the torque rotor shaft should be rotated to the 12

Figure 11

o’clock position.

Operating Procedures

12

Model 430 Torque

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Shake/Slush Freezer Information found on data plate Table of Contents Table of Contents Section Installer SafetySite Preparation Air Cooled Units Electrical ConnectionsBeater Rotation RefrigerantTo the Operator Section Safety Model 430 Torque Safety090114 Safety Model 430 Torque Operator Parts Identification Description Part Number111018 Operator Parts Identification Model 430 Torque Description Part Number Section Important To the Operator Section Operating Procedures AssemblyOperating Procedures Model 430 Torque Step Sanitizing Priming Draining Product From The Freezing Cylinder Closing ProcedureRinsing Disassembly CleaningBrush Cleaning During Cleaning and Sanitizing Important Operator ChecklistRegular Maintenance Checks Winter Storage Section Troubleshooting Guide Problem Probable Cause RemedyModel 430 Torque Troubleshooting Guide Parts Replacement Schedule Section Parts List Description Part QTY Warr Remarks Parts Number Class UpdateDescription Part QTY Warr Remarks Parts Draw Valve Probe A.-MIX OUT-SQUARE Hole 043027HABK 208-230V 60HZ 1PH Torque W/PURGE Port Door 043012HACO 115V 60HZ 1PH Flavor Burst Ready 043012H210 115V 60HZ 1PH Panel SPIN-RIGHT SIDE-HARD Slush PANEL-BACK *430 MAN-OPER 430 Dunkin Donut Model 430 Torque Model 430 Torque

430 TORQUE specifications

The Taylor 430 TORQUE is a powerful and versatile machine designed for professional landscapers and agricultural operators looking to enhance their productivity and efficiency. Known for its robust construction and advanced technologies, the 430 TORQUE has made a name for itself in the industry, providing exceptional performance in various applications.

One of the standout features of the Taylor 430 TORQUE is its impressive engine capacity. Equipped with a high-performance engine, this machine delivers consistent torque and power, enabling operators to tackle even the toughest jobs with ease. The engine is designed for durability and longevity, ensuring that it can withstand the rigors of regular use in demanding environments.

In terms of design, the 430 TORQUE boasts a compact and lightweight profile, which increases its maneuverability. This makes it ideal for working in tight spaces and navigating around obstacles, allowing operators to achieve a greater level of precision in their work. The machine’s advanced hydraulic system provides smooth operation and responsive controls, further enhancing its performance and user experience.

One of the key technologies integrated into the Taylor 430 TORQUE is its intelligent control system. This system allows operators to monitor and adjust various parameters in real-time, optimizing performance according to specific job requirements. Features such as automatic speed adjustment and load sensing technology enable the machine to operate efficiently, reducing fuel consumption and minimizing wear and tear on the engine.

The 430 TORQUE is also equipped with a range of attachments, making it a versatile solution for different tasks. Whether it’s mowing, tilling, or excavating, operators can easily switch between attachments to suit their needs. This adaptability saves time and increases efficiency, making the machine a valuable asset for any landscaping or agricultural operation.

In terms of safety, the Taylor 430 TORQUE is designed with various protective features such as an ergonomic operator seat, safety guards, and emergency stop controls. These features ensure that operators can work with confidence and peace of mind, knowing that safety is a priority.

In summary, the Taylor 430 TORQUE stands out in the marketplace due to its exceptional power, advanced technologies, and versatile design. It is an invaluable tool for professionals in the landscaping and agricultural sectors, proving to be efficient, reliable, and user-friendly for a variety of tasks. With the Taylor 430 TORQUE, operators can expect to achieve excellent results while minimizing downtime and maximizing productivity.
Top Page Image Contents