Taylor 430 TORQUE manual Section Safety, Model 430 Torque Safety

Page 9

Section 3

Safety

 

 

We at Taylor Company are concerned about the safety of the operator when he or she comes in contact with the freezer and its parts. Taylor has gone to extreme efforts to design and manufacture built--in safety features to protect both you and the service technician. As an example, warning labels have been attached to the freezer to further point out safety precautions to the operator.

IMPORTANT -- Failure to adhere to the following safety precautions may result in severe personal injury or death. Failure to comply with these warnings may damage the machine and its components. Component damage will result in part replacement expense and service repair expense.

DO NOT operate the freezer without reading this Operator Manual. Failure to follow this instruction may result in equipment damage, poor freezer performance, health hazards, or personal injury.

Per IEC 60335--1 and its part 2 standards, “This appliance is to be used only by trained personnel. It is not intended for use by children or people with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless given supervision or instruction concerning the use of the appliance by a person responsible for their safety.”

This unit is provided with an equipotential grounding lug that is to be properly attached to the rear of the frame by the authorized installer. The installation location is marked by the equipotential bonding symbol (5021 of IEC 60417-1) on both the removable panel and the equipment’s frame.

DO NOT use a water jet to clean or rinse the freezer. Failure to follow these instructions may result in serious electrical shock.

SDO NOT operate the freezer unless it is properly grounded.

SDO NOT operate the freezer with larger fuses than specified on the freezer data label.

SAll repairs must be performed by an authorized Taylor service technician. The main power supplies to the machine must be disconnected prior to performing any repairs.

SCord Connected Units: Only Taylor authorized service technicians may install a plug on this unit.

SStationary appliances which are not equipped with a power cord and a plug or another device to disconnect the appliance from the power source must have an all-pole disconnecting device with a contact gap of at least 3 mm installed in the external installation.

SAppliances that are permanently connected to fixed wiring and for which leakage currents may exceed 10 mA, particularly when disconnected, not used for long periods, or during initial installation, shall have protective devices such as a GFI to protect against the leakage of current, installed by authorized personnel to the local codes.

SSupply cords used with this unit shall be oil-resistant, sheathed flexible cable, not lighter than ordinary polychloroprene or other equivalent synthetic elastomer-sheathed cord (Code designation 60245 IEC 57) installed with the proper cord anchorage to relieve conductors from strain, including twisting, at the terminals and protect the insulation of the conductors from abrasion.

Failure to follow these instructions may result in electrocution. Contact your local authorized Taylor Distributor for service.

 

 

110414

 

 

 

Model 430 Torque

5

Safety

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Shake/Slush Freezer Information found on data plate Table of Contents Table of Contents Installer Safety SectionSite Preparation Electrical Connections Air Cooled UnitsRefrigerant Beater RotationTo the Operator Model 430 Torque Safety Section Safety090114 Safety Model 430 Torque Description Part Number Operator Parts Identification111018 Operator Parts Identification Model 430 Torque Description Part Number Section Important To the Operator Assembly Section Operating ProceduresOperating Procedures Model 430 Torque Step Sanitizing Priming Closing Procedure Draining Product From The Freezing CylinderRinsing Cleaning DisassemblyBrush Cleaning Important Operator Checklist During Cleaning and SanitizingRegular Maintenance Checks Winter Storage Problem Probable Cause Remedy Section Troubleshooting GuideModel 430 Torque Troubleshooting Guide Parts Replacement Schedule Description Part QTY Warr Remarks Parts Number Class Update Section Parts ListDescription Part QTY Warr Remarks Parts Draw Valve Probe A.-MIX OUT-SQUARE Hole 043027HABK 208-230V 60HZ 1PH Torque W/PURGE Port Door 043012HACO 115V 60HZ 1PH Flavor Burst Ready 043012H210 115V 60HZ 1PH Panel SPIN-RIGHT SIDE-HARD Slush PANEL-BACK *430 MAN-OPER 430 Dunkin Donut Model 430 Torque Model 430 Torque

430 TORQUE specifications

The Taylor 430 TORQUE is a powerful and versatile machine designed for professional landscapers and agricultural operators looking to enhance their productivity and efficiency. Known for its robust construction and advanced technologies, the 430 TORQUE has made a name for itself in the industry, providing exceptional performance in various applications.

One of the standout features of the Taylor 430 TORQUE is its impressive engine capacity. Equipped with a high-performance engine, this machine delivers consistent torque and power, enabling operators to tackle even the toughest jobs with ease. The engine is designed for durability and longevity, ensuring that it can withstand the rigors of regular use in demanding environments.

In terms of design, the 430 TORQUE boasts a compact and lightweight profile, which increases its maneuverability. This makes it ideal for working in tight spaces and navigating around obstacles, allowing operators to achieve a greater level of precision in their work. The machine’s advanced hydraulic system provides smooth operation and responsive controls, further enhancing its performance and user experience.

One of the key technologies integrated into the Taylor 430 TORQUE is its intelligent control system. This system allows operators to monitor and adjust various parameters in real-time, optimizing performance according to specific job requirements. Features such as automatic speed adjustment and load sensing technology enable the machine to operate efficiently, reducing fuel consumption and minimizing wear and tear on the engine.

The 430 TORQUE is also equipped with a range of attachments, making it a versatile solution for different tasks. Whether it’s mowing, tilling, or excavating, operators can easily switch between attachments to suit their needs. This adaptability saves time and increases efficiency, making the machine a valuable asset for any landscaping or agricultural operation.

In terms of safety, the Taylor 430 TORQUE is designed with various protective features such as an ergonomic operator seat, safety guards, and emergency stop controls. These features ensure that operators can work with confidence and peace of mind, knowing that safety is a priority.

In summary, the Taylor 430 TORQUE stands out in the marketplace due to its exceptional power, advanced technologies, and versatile design. It is an invaluable tool for professionals in the landscaping and agricultural sectors, proving to be efficient, reliable, and user-friendly for a variety of tasks. With the Taylor 430 TORQUE, operators can expect to achieve excellent results while minimizing downtime and maximizing productivity.
Top Page Image Contents