Taylor 430 TORQUE manual Sanitizing

Page 18

Step 7

Install the front drip pan. Slide the long drip pan into the hole in the front panel.

Figure 17

Step 8

Install the front drip tray and splash shield beneath the door spout.

Figure 18

Step 9

Lay the air/mix feed tube (optional) in the bottom of the mix hopper.

Sanitizing

Step 1

Prepare a pail of an approved 100 PPM sanitizing solution (examples: 2--1/2 gal. [9.5 liters] of Kay--5Ror 2 gal. [7.6 liters] of Stera--SheenR). USE WARM WATER AND FOLLOW THE MANUFACTURER’S SPECIFICATIONS.

Step 2

Pour the sanitizing solution into the hopper and allow it to flow into the freezing cylinder.

Figure 20

Step 3

While the solution is flowing into the freezing cylinder, brush clean the mix hopper, air/mix feed tube (optional) and mix inlet hole.

Step 4

Place the power switch in the “WASH” position. This will agitate the sanitizing solution in the freezing cylinder. Allow the solution to agitate for five minutes.

Figure 19		Figure 21
090114

Operating Procedures	14	Model 430 Torque

Image 18

Contents Shake/Slush Freezer Information found on data plate Table of Contents Table of Contents Installer Safety SectionSite Preparation Air Cooled Units Electrical ConnectionsBeater Rotation RefrigerantTo the Operator Section Safety Model 430 Torque Safety090114 Safety Model 430 Torque Operator Parts Identification Description Part Number111018 Operator Parts Identification Model 430 Torque Description Part Number Section Important To the Operator Section Operating Procedures AssemblyOperating Procedures Model 430 Torque Step Sanitizing Priming Closing Procedure Draining Product From The Freezing CylinderRinsing Cleaning DisassemblyBrush Cleaning Important Operator Checklist During Cleaning and SanitizingRegular Maintenance Checks Winter Storage Section Troubleshooting Guide Problem Probable Cause RemedyModel 430 Torque Troubleshooting Guide Parts Replacement Schedule Section Parts List Description Part QTY Warr Remarks Parts Number Class UpdateDescription Part QTY Warr Remarks Parts Draw Valve Probe A.-MIX OUT-SQUARE Hole 043027HABK 208-230V 60HZ 1PH Torque W/PURGE Port Door 043012HACO 115V 60HZ 1PH Flavor Burst Ready 043012H210 115V 60HZ 1PH Panel SPIN-RIGHT SIDE-HARD Slush PANEL-BACK *430 MAN-OPER 430 Dunkin Donut Model 430 Torque Model 430 Torque

430 TORQUE specifications

The Taylor 430 TORQUE is a powerful and versatile machine designed for professional landscapers and agricultural operators looking to enhance their productivity and efficiency. Known for its robust construction and advanced technologies, the 430 TORQUE has made a name for itself in the industry, providing exceptional performance in various applications.

One of the standout features of the Taylor 430 TORQUE is its impressive engine capacity. Equipped with a high-performance engine, this machine delivers consistent torque and power, enabling operators to tackle even the toughest jobs with ease. The engine is designed for durability and longevity, ensuring that it can withstand the rigors of regular use in demanding environments.

In terms of design, the 430 TORQUE boasts a compact and lightweight profile, which increases its maneuverability. This makes it ideal for working in tight spaces and navigating around obstacles, allowing operators to achieve a greater level of precision in their work. The machine’s advanced hydraulic system provides smooth operation and responsive controls, further enhancing its performance and user experience.

One of the key technologies integrated into the Taylor 430 TORQUE is its intelligent control system. This system allows operators to monitor and adjust various parameters in real-time, optimizing performance according to specific job requirements. Features such as automatic speed adjustment and load sensing technology enable the machine to operate efficiently, reducing fuel consumption and minimizing wear and tear on the engine.

The 430 TORQUE is also equipped with a range of attachments, making it a versatile solution for different tasks. Whether it’s mowing, tilling, or excavating, operators can easily switch between attachments to suit their needs. This adaptability saves time and increases efficiency, making the machine a valuable asset for any landscaping or agricultural operation.

In terms of safety, the Taylor 430 TORQUE is designed with various protective features such as an ergonomic operator seat, safety guards, and emergency stop controls. These features ensure that operators can work with confidence and peace of mind, knowing that safety is a priority.

In summary, the Taylor 430 TORQUE stands out in the marketplace due to its exceptional power, advanced technologies, and versatile design. It is an invaluable tool for professionals in the landscaping and agricultural sectors, proving to be efficient, reliable, and user-friendly for a variety of tasks. With the Taylor 430 TORQUE, operators can expect to achieve excellent results while minimizing downtime and maximizing productivity.