I N S TA L L AT I O N I N S T R U C T I O N S
E S E R I E S BUILT- IN SINGLE OVENS
S TA N D A R D I N S TA L L AT I O N
IMPORTANT NOTE: For standard installations, a minimum 610 mm of usable cabinet depth is required, or the back panel of the cabinet may need to be removed for proper installation.
The electrical box must be flush with the back panel of the cabinet.
For standard installations, the E Series
F L U S H I N S E T I N S TA L L AT I O N
IMPORTANT NOTE: For flush inset installa- tions, a minimum 635 mm of usable cabinet depth is required, or the back panel of the cabinet may need to be removed for proper installation. The electrical box must be flush with the back panel of the cabinet.
The flush inset installation requires the
IMPORTANT NOTE: For flush inset installa- tions, the inside edges of the rough opening must be finished, as they will be exposed when the oven door is open. These edges should be stained instead of having a lami- nated surface, to avoid damage from high temperatures during
C O M B I N AT I O N I N S TA L L AT I O N S
The Wolf E Series single oven may be installed below a Wolf 762 mm induction, electric or gas cooktop. Unless you are using cabinets deeper than 610 mm for a standard installation or 635
mmfor a flush inset installation, it is recom- mended that the electrical supply be placed in the base cabinet to the right of the oven. The E Series single oven may also be installed below a Wolf 914 mm induction, electric or gas cooktop.
A Wolf E Series single oven may be installed next to another E Series single oven. You must allow for a 64 mm space between the oven rough openings. Also, a separate inner wall is required for each oven between openings.
7