W O L F E SERIES BUILT- IN OVENS
E S E R I E S BUILT- IN SINGLE OVENS
M O D E L S I C B S O 3 0 - 2 F / S A N D
I C B S O 3 0 - 2 U / S
IMPORTANT NOTE: A minimum 610 mm of usable cabinet depth is required, or the back panel of the cabinet may need to be removed for proper installation. A minimum 635 mm of usable cabinet depth is required for a flush inset installation. The electrical box must be flush with the back panel of the cabinet.
For ease of installation, Wolf recommends using 838 mm wide cabinets with the E Series single oven. A minimum 838 mm wide cabinet is required for a flush inset installation. The cabinet base platform must be able to support 113 kg.
Refer to the following illustrations for overall dimensions, installation specifications and electrical location for the E Series single oven.
The E Series single oven requires a separate, grounded
IMPORTANT NOTE: Unless you are using cabinets deeper than 610 mm for a standard installation or 635 mm for a flush inset installa- tion, it is recommended that the electrical supply be placed in an adjacent cabinet. Choose the location shown in the installation illustrations on pages
O V E R A L L D I M E N S I O N S – M O D E L S I C B S O 3 0 - 2 F / S A N D I C B S O 3 0 - 2 U / S
25 mm | RIGHT SIDE VIEW |
|
TOP VIEW |
|
|
|
|
|
| 32 mm |
|
|
|
|
|
| ||
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
48 mm
759 mm
708 mm
67 mm
CONDUIT
CHANNEL
48 mm
603 mm
BEHIND FRAME
687 mm
603 mm
718 mm
559 mm
Unframed Model
OPEN OVEN DOOR
6
759 mm