Adjustments

Bin Ice Level Adjustment

When the ice maker shuts off the ice level in the bin should be even with the metal tube inside the bin. If the ice in the bin is too high or low, turn the ice maker control knob to adjust the bin thermostat.

1)To lower the ice level, turn the knob counterclockwise. Usually a 1/8 turn will be enough.

2)To increase the ice level, turn the knob clockwise. Usually a 1/8 turn will be enough.

Icemaker Control Knob
	OFF
	LOW
	HIGH
ICE LEVEL	CONTROL
	NORMAL

Ice Maker Control Knob

Harvest Time Adjustment

The amount of harvest time may be adjusted. It is preset from the factory at about 3 minutes, which should be ade- quate to release all cubes and fill the reservoir. If the timer needs to be adjusted:

1)Unplug or disconnect the electrical power.

2)Remove the kickplate.

3)Remove the control box cover.

4)Locate the timer, and loosen the set screw that holds the two halves of the timer cam together.

5)Rotate one half of the cam to open or close the lower portion of the cam. More of an opening equals more harvest time and less of an opening means less har- vest time.

6)Tighten the set-screw.

7)Replace the control box cover and kickplate.

8)Reconnect the electrical power.

WARNING

Electrical Shock Hazard

Disconnect electrical power before beginning removal of parts.

Harvest Time Adjustment