Traulsen R & A Series owner manual VII. u HOT Food UNITS, Turning the Unit OFF/ON

Page 21

VII. INTELA-TRAUL®(continued)

VII. t - HOT FOOD UNITS, ADJUSTING THE THERMOSTAT & TURNING THE UNIT OFF/ON:

This parameter sets the desired cabinet temperature. Please note that hot food units are delivered from the factory set to the OFF position.

Follow the instructions to enter the customer access code on page 11. When the control reads

Thermostat Set Point High, press the set button SET .

 

Use the arrow keys

to adjust the temperature to your desired setting. When the display

shows the temperature you want press the set button

SET . The display will then read

Thermostat Set Point High. You can use the up or down

arrow keys to scroll to

the next parameter or press the alarm cancel button

to exit.

 

VII. u - HOT FOOD UNITS, TURNING THE UNIT OFF/ON:

After the temperature has been set, the customer can continuously turn the unit OFF and then back

ON to the same temperature. To turn the unit ON /OFF press the alarm cancel button , (please note that this feature is not available on versions of the control manufactured prior to September 2000), or if an alarm warning condition is present, use the alternative ON/OFF activation method.

To turn the unit ON/OFF using the alternative method, press both arrows at the same time, the set temperature will remain in memory.

VII. u - HOT FOOD UNITS, TEMPERATURE ADJUSTMENT:

Press the SET button SET and the UP ARROW button

 

at the same time. The display will

 

flash the current temperature setting or OFF (if the unit is turned off). Use the UP

 

or DOWN

 

ARROW

 

buttons to adjust your desired temperature setting (temperature range is 120° thru

 

180° F, and OFF) then press the SET button SET . The display will go back to reading cabinet temperature. If OFF is selected. the display will then read OFF. NOTE: If you wish to change the set temperature at anytime follow this procedure.

These models also include a “One-Time Temperature Setting Adjustment” feature. Upon start-up, the unit will warm-up to the last temperature you had set for it, unless changed.

-20-

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Form Number TR35743 REV /04 Serial TAG Table of ContentsIII. Installation III. InstallationStable Before Installing Legs or Casters II. Receipt InspectionSealing Base of ROLL-IN Models III. Installation IV. Operation Care & MaintenanceEfficiently and use less energy First consulting the factoryReplacing the Gaskets Care & Maintenance cont’dVI. Other VII. The INTELA-TRAULControl System Alarms See the following pages for explanationsVII. INTELA-TRAUL VII. a Alarm ExplanationsPossible Causes for Refrigerator & Freezer Models Possible CausesLED for F Alarm Cancel Button Defrost IconDigit RED LED Display LEDVII. e Notes to the User VII. h Adjusting the Thermostat SET Point High VII. g Customer Service ParametersVII. j Changing the Temperature Scale VII. i Adjusting the Thermostat SET Point LOWVII. k Setting the 24-HOUR Clock VII. m Setting Daylight Savings Time VII. l Setting the DateVII. n Starting a Manual Defrost Cycle Defrost IconSample VII. o Setting the Defrost LockoutsVII. q Adjusting the Room Temperature Offset VII. p Adjusting the Door Perimeter HeatersVII. s Viewing Sensor Temperatures VII. r Setting the Audible Alarm StyleVII. u HOT Food UNITS, Turning the Unit OFF/ON VII. u HOT Food UNITS, Temperature AdjustmentFind Your Problem Here Remedy VIII. Trouble Shooting GuidePart Description XI. Spare Parts ListXII. Stainless Steel Overview XIII. Care of Stainless SteelXII. b Stainless STEEL, HOW IT Works XIV. Corrosion Remedies Cont’dStandard Domestic Warranty XV. Warranty InformationINTELA-TRAUL XVI. IndexHours of Operation
Top Page Image Contents