VII. INTELA-TRAUL® (continued)
VII. p - ADJUSTING THE DOOR PERIMETER HEATERS:
This parameter allows the customer to turn ON and OFF the
Follow the instructions to enter the customer access code on page 11. When the control displays
|
|
|
|
|
|
| Thermostat Set High, press the down arrow key |
| until the control display reads |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DewPoint Compensation Factor. Press the set button SET . | Press the arrow keys |
|
|
|
| to | |||||||||||||
|
|
| |||||||||||||||||
|
| ||||||||||||||||||
adjust the factor to your desired setting. When the display shows the factor you want press the set
button SET . The display will then read 
Thermostat Set Point High. You can use the up or
down arrow keys
to scroll to the next parameter or press the alarm cancel button to exit
))) .
VII. q - ADJUSTING THE ROOM TEMPERATURE OFFSET:
The room temperature offset parameter allows a service technician or end user the ability to have the display show a temperature that is within three degrees of the actual temperature being read by the cabinet air sensor. This allows for continuity of reading between different temperature reading devices. (i.e.: thermistor Vs thermocouple Vs handheld thermometer) This parameter is preset at the factory to “0” or no offset.
Follow the instructions to enter the customer access code on page 11. When the control displays
Thermostat Set High, press the down arrow key
until the control display reads
Room Temperature Offset. Press the set button SET . Use the arrow keys 
to adjust the offset to your desired setting. When the display shows the offset you want press the set button SET .
The display will then read 
Thermostat Set Point High. You can use the up or down arrow
keys | to scroll to the next parameter or press the alarm cancel button to exit | ) . |
|
| )) |