Traulsen TU072LT, TU044LT, TU072HT, TU100HT, TU044HT II. Receipt Inspection, III. Installation

Page 3

II. RECEIPT INSPECTION

All Traulsen products are factory tested for performance and are free from defects when shipped. The utmost care has been taken in crating this product to protect against damage in transit.

You should carefully inspect your unit for damage during delivery. If damage is detected, you should save all the crating materials and make note on the carrier’s Bill Of Lad- ing describing the damage. A freight claim should be filed immediately. If damage is subsequently noted during or immediately after installation, contact our customer care team to file a freight claim. There is a fifteen (15) day limit to file freight damage with the carrier. Under no condition may a damaged unit be returned to Traulsen without first obtaining written permission (return authorization). You may contact Hobart/Traulsen customer care at 800-333- 7447 to request a return or file a claim.

III.INSTALLATION (continued)

III.c - INSTALLING/ADJUSTING LEGS OR CASTERS:

To install legs or casters, slide leg or caster into the caster channel from the side of the unit without the refrigeration system.

To adjust the legs or casters, loosen the two bolts and move leg or caster to desired location, spacing between leg or caster not to exceed 48 inches. Leg or caster on each end of the unit can not exceed 8 inches from the end of the cabinet.

NOTE: Traulsen recommends to position legs or casters under the mullion when possible.

CASTER CHANNEL

III.INSTALLATION

III.a - LOCATION:

Select a proper location for your unit, away from extreme heat or cold. Allow enough clearance between the unit and the side wall in order to make use of the door stay open feature at 1200 (self-closing feature operates up to 900). The door(s) must be able to open a minimum of 900 in order to make use of the maximum clear door width.

III.b - PACKAGING:

Your Traulsen unit is shipped from the factory bolted to a sturdy wooden pallet in stretch wrapped material.

Most exterior stainless steel surfaces have a protective vinyl covering to prevent scratching during manufactur- ing, shipping and installation. After the unit is installed in place of application peel, remove and discard the covering from all surfaces.

To remove the wooden pallet, first if at all possible, we suggest that the cabinet remain bolted to the pallet dur- ing all transportation to the point of final installation. The bolts can then be removed with a 1/2” socket wrench. Avoid laying the unit on its front, side or back for removal of the pallet.

NOTE: Traulsen does not recommend laying the unit on its front, side or back. If you must, please allow the unit to remain in an upright position for 24 hours before plugging it in so that the compressor oils and refrigerant may settle.

CASTER PLATE

BOLT

III.d - CORD & PLUG:

All self-contained models are shipped standard with a NEMA 5-15P plug and 9 foot cord . Select only a dedicated electrical outlet for power source.

NOTE: Do not under any circumstances, cut or remove the round grounding prong from the plug, or use an extension cord.

III.e - POWER SUPPLY:

The supply voltage should be checked prior to connection to be certain that proper voltage for the cabinet wiring is available (refer to the serial tag to determine correct unit voltage, see page 1). Make connections in accordance with local electrical codes. Use qualified electricians.

Use of a separate, dedicated circuit is required. Size wiring to handle indicated load and provide necessary overcurrent protector in circuit (see amperage requirements on the unit’s serial tag).

-2-

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Quality Refrigeration Serial TAG Table of ContentsII. Receipt Inspection III. InstallationIV. b Freezers Cleaning the CONDENSER/FILTERIV. Operation IV. a RefrigeratorsVI. a Removing the Door and Installing Drawers Cleaning the Cabinet SurfacesReplacing the Gaskets VII. Microprocessor Control VII. Microprocessor Control VII. b Alarm ExplanationsVII. d Notes to the User VII. c Control Panel DiagramVII. e Enter the Service Access VII. g Adjusting Thermostat SET Point High VII. f Service ParametersVII. i Changing the Temperature Scale VII. h Adjusting Thermostat SET Point LOWVII. j Setting the 24-HOUR Clock VII. l Setting Daylight Savings Time VII. k Setting the DateVII. m Starting a Manual Defrost Cycle Sample VII. n Setting the Defrost LockoutsVII. p Adjusting the Room Temperature Offset VII. o Adjusting the Drawer Perimeter HeatersVII. r Viewing Sensor Temperatures VII. q Setting the Audible Alarm StyleVIII. Wiring Diagram Problem Possible Solution IX. Trouble Shooting GuideSpare Parts Information Service AssistanceService Information Warranty RegistrationXI. Warranties Standard Domestic WarrantyDoor ALL Models XII. Service Parts ListPage Quality Refrigeration

TU044HT, TU072LT, TU100HT, TU072HT, TU044LT specifications

Traulsen, a leader in commercial refrigeration, offers a range of innovative products designed to meet the needs of food service operators. Among these, the TU044LT, TU072HT, TU100HT, TU072LT, and TU044HT models stand out for their efficiency, reliability, and advanced features.

The TU044LT is a low-temperature undercounter freezer that delivers exceptional performance in compact spaces. With a capacity of 44 cubic feet, it is ideal for restaurants with limited storage. Its energy-efficient design ensures lower operational costs, while the stainless steel exterior offers durability and easy cleaning. Equipped with advanced digital controls, this freezer maintains consistent temperatures, ensuring your ingredients remain fresh and safe.

Next in line is the TU072HT, a high-temperature unit designed for maximum efficiency. It provides ample storage with a capacity of 72 cubic feet and features a robust refrigeration system that operates quietly. The TU072HT is perfect for storing bulk ingredients, thanks to its adjustable shelving, which offers flexibility for users. Additionally, its self-closing doors enhance energy efficiency and help maintain the optimal internal temperature.

The TU100HT model takes this a step further with an even larger capacity of 100 cubic feet, making it ideal for high-volume establishments. Its advanced insulation technology ensures minimal energy consumption while maintaining superior temperature control. The TU100HT also comes equipped with a digital temperature display, allowing users to monitor and adjust settings easily. The heavy-duty construction ensures longevity, even in the busiest kitchens.

For those seeking a combination of features, the TU072LT provides both low-temperature and ample storage space. This model combines the technological advancements of Traulsen with a practical design, offering a significant 72 cubic feet of storage. Its eco-friendly refrigerant reduces environmental impact while ensuring maximum efficiency.

Lastly, the TU044HT model is a high-temperature reach-in unit with a compact design that does not compromise on capacity. This freezer is engineered to provide reliable performance with a focus on energy efficiency. The adjustable shelving and LED lighting improve visibility and accessibility, making it a practical choice for busy restaurants.

In summary, the Traulsen TU044LT, TU072HT, TU100HT, TU072LT, and TU044HT models exemplify quality and innovation in commercial refrigeration. With their varied capacities and cutting-edge technologies, these units are designed to enhance operational efficiency, reduce energy costs, and maintain the integrity of food products in any food service operation.
Top Page Image Contents