True Manufacturing Company T-35 Installing Optional Castors on a T-12FG, Final Location

Page 10

True Food Service Equipment, Inc.

INSTALLATION / OPERATION INSTRUCTIONS

INSTALLING OPTIONAL CASTORS ON A T-12FG

Final Location

A.Place styrofoam corners behind cooler for cushion and carefully tilt unit on it’s back.

B.Remove the louvered grill by removing four phillips-head screws.

C.Remove the four bolts from the skid with an adjustable wrench, and locate the four castors. Castors are placed inside cooler, within the bubble wrap.

D.Install one castor in each of the four female threaded areas as indicated.

NOTE: Two out of the four castors are designated with an “F” for front. These are provided with hand-brakes. Position these castors in FRONT of the unit.

E.When all castors have been threaded fully, replace grill and lift unit; positioning it into its final location.

F.Ensure that the two front castors are positioned FORWARD as illustrated and locked down with the hand-brakes.

WARNING:

Unit may tip forward if procedure “F” is not

strictly followed.

G.Units final location should be adequately ventilated. Conditions where heat exceeds 100ºF require an exhaust fan.

H.Ensure that the drain hose for hoses are positioned in the pan.

I.Free plug and cord from inside the lower rear of the cooler (Do Not Plug In.)

WARNING:

Warranty is VOID if ventilation is insufficient.

J.The unit should be placed close enough to the electrical supply so that extension cords are NEVER used.

WARNING:

Compressor warranties are void if the unit is more

than 6 1/2ft. (1.98m) from plug-in connection.

K.Proper leveling of your TRUE cooler is critical to operating success. Effective condensate removal and door operation will be effected by leveling. Adjust castors or add shims.

POSITIONING OF THE

CASTOR IS CRITICAL.

ORIENT THE CASTOR IN

THE FORWARD POSITION

AS SHOWN

8

www.truemfg.com

8

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Series Freezer / Refrigerator Swing Slide Door True Food Service Equipment, Inc Safety Precautions Safety Information Before You Throw Away Your Old Refrigerator or Freezer Proper Disposal of the Freezer / RefrigeratorUSE of Extension Cords Refrigerant DisposalHOW to Connect Electricity North America Use OnlyRequired Tools Installation / Operation Instructions OwnershipUncrating Leveling LocatingRemote Units This section applies to remotes only Securing Castors and Legs Unit levelingInstalling Optional Castors on a T-12FG Final LocationConductors and Circuits Electrical Instructions Sealing Cabinet to FloorStartup Replacement PartsRecommendation Wire Shelves Shelving Installation / Operation & Light Switch LocationShelf & Organizer Installation Light Switch LocationFreezers Defrost Time Clock Operation Grasslin Timer If the Motor Compressor If the Compressor willNot RUN Starts but TripsDefrost Time Clock Light Cover Installation for T-12FG MAINTENANCE, Care & Cleaning Cleaning the Condenser Coil Required ToolsImportant Warranty Information Temperature Control Adjustment for High Altitude only Danfoss Temperature Control High Altitude OnlyStainless Steel Equipment Care and Cleaning Interior Lights Light Bulb ReplacementIDL Integrated Door Lighting IDL Integrated Door LightingA. Warranty Information U.S.A & Canada only

T-35 specifications

True Manufacturing Company has long been synonymous with excellence in refrigeration equipment, and the T-35 model is no exception. This commercial refrigeration unit exemplifies the company's commitment to design, durability, and user-friendly features, making it a top choice for restaurants, cafes, and other foodservice operations.

The True T-35 is a powerful and highly efficient one-section refrigerator that features a spacious interior, ideal for holding a significant quantity of perishable items. This reach-in refrigerator is built with a stainless-steel exterior, ensuring not only a sleek appearance but also durability against the rigors of any commercial kitchen environment. The interior is comprised of aluminum, which provides easy cleaning and maintenance, ensuring adherence to health and safety standards.

One of the standout features of the T-35 is its advanced refrigeration system. It is equipped with a factory-balanced refrigeration system that utilizes environmentally friendly refrigerant, enhancing energy efficiency while providing excellent temperature control. The unit maintains temperatures ranging from 33°F to 38°F, crucial for preserving the freshness of perishable items.

In addition to its robust cooling capabilities, the T-35 incorporates a self-contained capillary tube system that delivers superior cooling performance even in high-demand situations. The evaporator fan motor runs continuously to ensure optimal air circulation, promoting uniform temperatures throughout the interior.

The True T-35 is designed with user comfort in mind. It comes with a set of adjustable, heavy-duty PVC-coated wire shelves, which allow operators to customize the layout based on their specific storage needs. The ergonomic door handles are easy to grip and open, making access to stored items seamless during busy service periods.

For energy efficiency, the T-35 includes features such as LED interior lighting, which not only enhances visibility but also reduces overall energy consumption. The unit is also designed to operate quietly, allowing it to fit seamlessly into any environment without causing disturbances.

Overall, the True Manufacturing Company T-35 combines functionality and efficiency in a beautifully designed package. Its advanced cooling technology, flexible storage options, and durable construction make it an indispensable asset for any foodservice operation, ensuring that food items remain fresh and safe for consumption. With a solid warranty and dedicated customer support, the T-35 represents the high standard of quality and reliability that True Manufacturing is renowned for.
Top Page Image Contents