True Manufacturing Company T-35 installation manual Securing Castors and Legs, Unit leveling

Page 9

True Food Service Equipment, Inc.

INSTALLATION / OPERATION INSTRUCTIONS

INSTALLATION OF CASTORS OR OPTIONAL LEGS

Important Safeguard for installation of leg/castor (Images 1-5 demonstrate procedure)

Securing Castors and Legs

To obtain maximum strength and stability of the unit, it is important that you make sure each castor is secure. Optional legs are hand-tightened securely against the lower rail assembly see image 4-5. The bearing race on the castor or the top edge of the leg must make firm contact with the rail.

Unit leveling

Four leveling shims have been provided for leveling castored units positioned on uneven floors. Shims must be positioned between rail end and bearing race.

A.Turn the bearing race counter-clockwise until the cabinet is level. Level front to back and side to side. (diagonally)

B.Install the desired number of shims, making sure the slot of the shim is in contact with the threaded stem of the castor. (See image 2)

C.If more than one shim is used, turn the slot at a 90° angle so they are not in line.

D.Turn the bearing race clockwise to tighten

and secure the castor by tightening the anchoring bolt with a 3/4 inch open-end wrench or the tool provided. (See image 3)

CAUTION

To avoid damage to lower rail assembly,

slowly raise unit to upright position.

Note: Open holes located on the cross members of the frame rail should be plugged before unit is in use.

1

 

2

 

3

 

4

 

 

 

 

 

 

 

Thread castor into the For leveling, insert the shim underside of cabinet frame rail. between the castor and frame rail.

Use the tool provided to

Thread leg into cabinet

tighten the castor into place.

bottom frame rail.

5

The end of the leg is adjustable to easy leveling.

Lower Rail

Lower Rail Assembly

Assembly

 

 

Rail End

Rail End

Snug Fit

 

 

Here

Snug Fit

Bearing

Here

Race

 

Leveling Shim

LegCastor

7

www.truemfg.com

7

Image 9
Contents Series Freezer / Refrigerator Swing Slide Door True Food Service Equipment, Inc Safety Precautions Safety Information USE of Extension Cords Proper Disposal of the Freezer / RefrigeratorBefore You Throw Away Your Old Refrigerator or Freezer Refrigerant DisposalNorth America Use Only HOW to Connect ElectricityInstallation / Operation Instructions Ownership Required ToolsUncrating Locating LevelingRemote Units This section applies to remotes only Unit leveling Securing Castors and LegsFinal Location Installing Optional Castors on a T-12FGConductors and Circuits Sealing Cabinet to Floor Electrical InstructionsReplacement Parts StartupRecommendation Shelf & Organizer Installation Shelving Installation / Operation & Light Switch LocationWire Shelves Light Switch LocationFreezers Defrost Time Clock Operation Grasslin Timer Not RUN If the Compressor willIf the Motor Compressor Starts but TripsDefrost Time Clock Light Cover Installation for T-12FG Required Tools MAINTENANCE, Care & Cleaning Cleaning the Condenser CoilImportant Warranty Information Danfoss Temperature Control High Altitude Only Temperature Control Adjustment for High Altitude onlyStainless Steel Equipment Care and Cleaning IDL Integrated Door Lighting Light Bulb ReplacementInterior Lights IDL Integrated Door LightingA. Warranty Information U.S.A & Canada only

T-35 specifications

True Manufacturing Company has long been synonymous with excellence in refrigeration equipment, and the T-35 model is no exception. This commercial refrigeration unit exemplifies the company's commitment to design, durability, and user-friendly features, making it a top choice for restaurants, cafes, and other foodservice operations.

The True T-35 is a powerful and highly efficient one-section refrigerator that features a spacious interior, ideal for holding a significant quantity of perishable items. This reach-in refrigerator is built with a stainless-steel exterior, ensuring not only a sleek appearance but also durability against the rigors of any commercial kitchen environment. The interior is comprised of aluminum, which provides easy cleaning and maintenance, ensuring adherence to health and safety standards.

One of the standout features of the T-35 is its advanced refrigeration system. It is equipped with a factory-balanced refrigeration system that utilizes environmentally friendly refrigerant, enhancing energy efficiency while providing excellent temperature control. The unit maintains temperatures ranging from 33°F to 38°F, crucial for preserving the freshness of perishable items.

In addition to its robust cooling capabilities, the T-35 incorporates a self-contained capillary tube system that delivers superior cooling performance even in high-demand situations. The evaporator fan motor runs continuously to ensure optimal air circulation, promoting uniform temperatures throughout the interior.

The True T-35 is designed with user comfort in mind. It comes with a set of adjustable, heavy-duty PVC-coated wire shelves, which allow operators to customize the layout based on their specific storage needs. The ergonomic door handles are easy to grip and open, making access to stored items seamless during busy service periods.

For energy efficiency, the T-35 includes features such as LED interior lighting, which not only enhances visibility but also reduces overall energy consumption. The unit is also designed to operate quietly, allowing it to fit seamlessly into any environment without causing disturbances.

Overall, the True Manufacturing Company T-35 combines functionality and efficiency in a beautifully designed package. Its advanced cooling technology, flexible storage options, and durable construction make it an indispensable asset for any foodservice operation, ensuring that food items remain fresh and safe for consumption. With a solid warranty and dedicated customer support, the T-35 represents the high standard of quality and reliability that True Manufacturing is renowned for.