True Manufacturing Company T-35 MAINTENANCE, Care & Cleaning Cleaning the Condenser Coil

Page 19

True Food Service Equipment, Inc.

MAINTENANCE, CARE & CLEANING

MAINTENANCE, CARE & CLEANING

CLEANING THE CONDENSER COIL

When using electrical appliances, basic safety precautions should be followed, including the following:

REQUIRED TOOLS:

Phillips Screwdriver

Stiff Bristle Brush

Adjustable Wrench

Air Tank or CO2 Tank

Vacuum Cleaner

Step 1

Disconnect power to unit.

Step 2

SLIDE DOOR MODELS: (See Image 1)

Take off lower grill assembly by removing two (2) screws in lower corners. (older models may have snap lock tabs instead of screws).

Loosen screws holding the top pivot pins. Swing grill up and remove frame hooks from pivot pins at top of louver.

SWING DOOR MODELS: (See Image 2)

Take off lower grill assembly by removing four (4) corner screws.

Step 3

Remove bolts anchoring compressor assembly to frame rails and carefully slide out. (tube connections are flexible)

Step 4

Clean off accumulated dirt from the condenser coil and the fan with a stiff bristle brush.

Step 5

Lift cardboard cover above fan at plastic plugs and carefully clean condenser coil and fan blades.

Step 6

INDOOR LOCATION:

After brushing condenser coil vacuum dirt from coil, and interior floor.

OUTDOOR LOCATION:

(GDM-33, GDM-47, and GDM-49 only) After brushing condenser coil blow CO2 through condenser from fin side to fan. (See Image 4.)

Step 7

Replace cardboard cover. Carefully slide compressor assembly back into position and replace bolts.

Step 8

Reinstall louver assembly onto unit with appropriate fastener and clips. Tighten all screws.

Step 9

Connect unit to power and check to see if compressor is running.

Image 2. Swing Door Models

Image 1. Slide Door Models

Image 3.

5-

1227

Image 4.

17

www.truemfg.com

17

Image 19
Contents Series Freezer / Refrigerator Swing Slide Door True Food Service Equipment, Inc Safety Precautions Safety Information Refrigerant Disposal Proper Disposal of the Freezer / RefrigeratorUSE of Extension Cords Before You Throw Away Your Old Refrigerator or FreezerNorth America Use Only HOW to Connect ElectricityRequired Tools Installation / Operation Instructions OwnershipUncrating Leveling LocatingRemote Units This section applies to remotes only Unit leveling Securing Castors and LegsFinal Location Installing Optional Castors on a T-12FGConductors and Circuits Sealing Cabinet to Floor Electrical InstructionsStartup Replacement PartsRecommendation Light Switch Location Shelving Installation / Operation & Light Switch LocationShelf & Organizer Installation Wire ShelvesFreezers Defrost Time Clock Operation Grasslin Timer Starts but Trips If the Compressor willNot RUN If the Motor CompressorDefrost Time Clock Light Cover Installation for T-12FG Required Tools MAINTENANCE, Care & Cleaning Cleaning the Condenser CoilImportant Warranty Information Danfoss Temperature Control High Altitude Only Temperature Control Adjustment for High Altitude onlyStainless Steel Equipment Care and Cleaning IDL Integrated Door Lighting Light Bulb ReplacementIDL Integrated Door Lighting Interior LightsA. Warranty Information U.S.A & Canada only

T-35 specifications

True Manufacturing Company has long been synonymous with excellence in refrigeration equipment, and the T-35 model is no exception. This commercial refrigeration unit exemplifies the company's commitment to design, durability, and user-friendly features, making it a top choice for restaurants, cafes, and other foodservice operations.

The True T-35 is a powerful and highly efficient one-section refrigerator that features a spacious interior, ideal for holding a significant quantity of perishable items. This reach-in refrigerator is built with a stainless-steel exterior, ensuring not only a sleek appearance but also durability against the rigors of any commercial kitchen environment. The interior is comprised of aluminum, which provides easy cleaning and maintenance, ensuring adherence to health and safety standards.

One of the standout features of the T-35 is its advanced refrigeration system. It is equipped with a factory-balanced refrigeration system that utilizes environmentally friendly refrigerant, enhancing energy efficiency while providing excellent temperature control. The unit maintains temperatures ranging from 33°F to 38°F, crucial for preserving the freshness of perishable items.

In addition to its robust cooling capabilities, the T-35 incorporates a self-contained capillary tube system that delivers superior cooling performance even in high-demand situations. The evaporator fan motor runs continuously to ensure optimal air circulation, promoting uniform temperatures throughout the interior.

The True T-35 is designed with user comfort in mind. It comes with a set of adjustable, heavy-duty PVC-coated wire shelves, which allow operators to customize the layout based on their specific storage needs. The ergonomic door handles are easy to grip and open, making access to stored items seamless during busy service periods.

For energy efficiency, the T-35 includes features such as LED interior lighting, which not only enhances visibility but also reduces overall energy consumption. The unit is also designed to operate quietly, allowing it to fit seamlessly into any environment without causing disturbances.

Overall, the True Manufacturing Company T-35 combines functionality and efficiency in a beautifully designed package. Its advanced cooling technology, flexible storage options, and durable construction make it an indispensable asset for any foodservice operation, ensuring that food items remain fresh and safe for consumption. With a solid warranty and dedicated customer support, the T-35 represents the high standard of quality and reliability that True Manufacturing is renowned for.