True Manufacturing Company T-35 installation manual Locating, Leveling

Page 8

True Food Service Equipment, Inc.

INSTALLATION / OPERATION INSTRUCTIONS

LOCATING

A.Place packing material behind cabinet as a cushion. Carefully lay the unit on its back to remove skid.

When lifting unit remember to

leave the cabinet upright for 24 hours before

plugging into power source.

B.Remove skid by unscrewing all base rail anchor brackets. Place skid to the side.

C.Carefully lift cabinet upright.

Removing skid from bottom of cabinet.

Some units have a polyester strap that secures the cabinet to the shipping skid. Cut this polyester strap and remove the wood skid.

Polyester Strap

LEVELING

A.Set unit in its final location. Be sure there is adequate ventilation in your room. Under extreme heat conditions, (100°F+, 38°C+), you may want to install an exhaust fan.

Warning

Warranty is void if ventilation is insufficient.

B.Proper leveling of your True cooler is critical to operating success (for non-mobile models). Effective condensate removal and door operation will be effected by leveling.

C.The cooler should be leveled front to back and side to side with a level.

D.Ensure that the drain hose or hoses are positioned in the pan.

E.Free plug and cord from inside the lower rear of the cooler (do not plug in).

F.The unit should be placed close enough to the electrical supply so that extension cords are never used.

Warning

Compressor warranties are void if the unit is more than 7 ft. (2.1m) from plug-in connection.

REMOTE UNITS (This section applies to remotes only!)

Remote cabinets must be ordered as remote. We do not recommend converting from a standard self contained to remote system.

All remote cabinets must be hard wired.

No castors available.

All remote cabinets come standard using 404A refrigerant.

All remote units come standard with expansion valve, liquid line solenoid, heated condensate pan, and defrost timer when applicable.

Contact True Technical Service for BTU requirements.

No wiring necessary between cabinet and condensing unit.

All remote condensing units purchased from True are 208/230 volts single phase.

If you have any questions regarding this section, please call True at 1-(800)-325-6152.

6

www.truemfg.com

6

Image 8
Contents Series Freezer / Refrigerator Swing Slide Door True Food Service Equipment, Inc Safety Precautions Safety Information Proper Disposal of the Freezer / Refrigerator USE of Extension CordsBefore You Throw Away Your Old Refrigerator or Freezer Refrigerant DisposalHOW to Connect Electricity North America Use OnlyUncrating Installation / Operation Instructions OwnershipRequired Tools Remote Units This section applies to remotes only LocatingLeveling Securing Castors and Legs Unit levelingInstalling Optional Castors on a T-12FG Final LocationConductors and Circuits Electrical Instructions Sealing Cabinet to FloorRecommendation Replacement PartsStartup Shelving Installation / Operation & Light Switch Location Shelf & Organizer InstallationWire Shelves Light Switch LocationFreezers Defrost Time Clock Operation Grasslin Timer If the Compressor will Not RUNIf the Motor Compressor Starts but TripsDefrost Time Clock Light Cover Installation for T-12FG MAINTENANCE, Care & Cleaning Cleaning the Condenser Coil Required ToolsImportant Warranty Information Temperature Control Adjustment for High Altitude only Danfoss Temperature Control High Altitude OnlyStainless Steel Equipment Care and Cleaning Light Bulb Replacement IDL Integrated Door LightingInterior Lights IDL Integrated Door LightingA. Warranty Information U.S.A & Canada only

T-35 specifications

True Manufacturing Company has long been synonymous with excellence in refrigeration equipment, and the T-35 model is no exception. This commercial refrigeration unit exemplifies the company's commitment to design, durability, and user-friendly features, making it a top choice for restaurants, cafes, and other foodservice operations.

The True T-35 is a powerful and highly efficient one-section refrigerator that features a spacious interior, ideal for holding a significant quantity of perishable items. This reach-in refrigerator is built with a stainless-steel exterior, ensuring not only a sleek appearance but also durability against the rigors of any commercial kitchen environment. The interior is comprised of aluminum, which provides easy cleaning and maintenance, ensuring adherence to health and safety standards.

One of the standout features of the T-35 is its advanced refrigeration system. It is equipped with a factory-balanced refrigeration system that utilizes environmentally friendly refrigerant, enhancing energy efficiency while providing excellent temperature control. The unit maintains temperatures ranging from 33°F to 38°F, crucial for preserving the freshness of perishable items.

In addition to its robust cooling capabilities, the T-35 incorporates a self-contained capillary tube system that delivers superior cooling performance even in high-demand situations. The evaporator fan motor runs continuously to ensure optimal air circulation, promoting uniform temperatures throughout the interior.

The True T-35 is designed with user comfort in mind. It comes with a set of adjustable, heavy-duty PVC-coated wire shelves, which allow operators to customize the layout based on their specific storage needs. The ergonomic door handles are easy to grip and open, making access to stored items seamless during busy service periods.

For energy efficiency, the T-35 includes features such as LED interior lighting, which not only enhances visibility but also reduces overall energy consumption. The unit is also designed to operate quietly, allowing it to fit seamlessly into any environment without causing disturbances.

Overall, the True Manufacturing Company T-35 combines functionality and efficiency in a beautifully designed package. Its advanced cooling technology, flexible storage options, and durable construction make it an indispensable asset for any foodservice operation, ensuring that food items remain fresh and safe for consumption. With a solid warranty and dedicated customer support, the T-35 represents the high standard of quality and reliability that True Manufacturing is renowned for.