This manual contains specific instructions on how to install this automotive TV/VCP floor console. Please read this manual thoroughly before installing the console into the vehicle.
**WARNING**
In order to maintain a safe mounting system, this console MUST be secured to the floor of the vehicle according to the instructions contained in this manual. Failure to do so may result in the console breaking loose in the event of an accident.
It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a television viewer or screen that is located in the motor vehicle at any point forward of the back of the driver’s seat, or that is visible, directly or indirectly, to the driver while operating the vehicle. This product should only be installed to the rear of the driver’s seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle.
Required tools for installation:
Electric drill ¼” steel drill bit 1/8” steel drill bit Phillips screwdriver
Socket wrench set with
Box end wrench, size 7/16”
Soldering Iron
Two people are required for installation.
0892105 Bracket Kit | 1 | |
8007101 | Bracket, Mounting | 4 |
8007105 | Screw, Hex #8x3/4 self drilling | 20 |
8007106 | Washer, 3/16” | 20 |
8007110 | Strap, Open, Nylon | 1 |
8007111 | Strap, Loop, Nylon | 1 |
8007125 | Bolt, ¼”x1 ½”, Hex | 4 |
8007126 | Washer, Fender 5/16” | 4 |
8007128 | Nut, Nylon Insert ¼” | 4 |
8007132 | Installation Manual | 1 |
P/N 8007132
Page 2 of 10
Rev. B