Audiovox K-9 installation instructions Step #1 Remove the Face of the Console

Page 3

There are six (6) steps to install the K-9 TV/VCP floor console:

Step # 1

Remove face of the console

Step # 2

Install brackets and the straps

Step # 3

Install console to the floor of the vehicle

Step # 4

Install VCP

Step # 5

Install TV

Step # 6

Replace console face

STEP #1 REMOVE THE FACE OF THE CONSOLE

ÞRemove 4 Phillips screws securing face of console to body of console.

ÞSet screws and face aside. Take care that screws do not get lost.

1) Disassemble shroud.

P/N 8007132

Page 3 of 10

Rev. B

Page 2 Page 4
Image 3
Page 2 Page 4
Contents REV. B BJ Two people are required for installation Step #1 Remove the Face of the Console Step #2 Install brackets and straps Pre-drill 1/8 pilot holes on bottom TV shelf for strap Rev. B Step #3 Install Console to Floor of Vehicle Step #4 Install VCP Into Console Step #5 Install TV Into Console Step #6 Replace the Face of the Console
Top Page Image Contents