Audiovox K-9 installation instructions Step #4 Install VCP Into Console

Page 8

STEP #4 INSTALL VCP INTO CONSOLE

ÞRemove VCP from box.

ÞConnect white RCA connector (customer supplied) from console wiring harness to white audio output jack of VCP.

ÞConnect yellow RCA connector (customer supplied) from console wiring harness to yellow audio output jack of VCP.

ÞConnect DC power connector (customer supplied) from console to DC power jack of VCP.

ÞSlide VCP into slot in front of console.

P/N 8007132

Page 8 of 10

Rev. B

Image 8

Contents REV. B BJ Two people are required for installation Step #1 Remove the Face of the Console Step #2 Install brackets and straps Pre-drill 1/8 pilot holes on bottom TV shelf for strap Rev. B Step #3 Install Console to Floor of Vehicle Step #4 Install VCP Into Console Step #5 Install TV Into Console Step #6 Replace the Face of the Console