Audiovox K-9 installation instructions Step #2 Install brackets and straps

Page 4

Step #2 Install brackets and straps

1) Mount brackets using four screws. Do not use center hole.

2) Use soldering iron, if necessary, to melt holes in open strap, as shown.

3) Use soldering iron, if necessary, to melt holes in closed strap, as shown.

P/N 8007132

Page 4 of 10

Rev. B

Image 4

Contents REV. B BJ Two people are required for installation Step #1 Remove the Face of the Console Step #2 Install brackets and straps Pre-drill 1/8 pilot holes on bottom TV shelf for strap Rev. B Step #3 Install Console to Floor of Vehicle Step #4 Install VCP Into Console Step #5 Install TV Into Console Step #6 Replace the Face of the Console