Audiovox K-9 installation instructions Step #5 Install TV Into Console

Page 9

STEP #5 INSTALL TV INTO CONSOLE

ÞConnect yellow RCA connector (customer supplied) to yellow RCA input jack on rear of television. This is the video connection.

ÞConnect white RCA connector (customer supplied) to white RCA input jack on rear of television. This is the audio connection.

ÞConnect DC power connector (customer supplied) to rear of television.

ÞConnect coaxial cable antenna “F” connector (customer supplied)to rear of television “ANT” input.

ÞPlace television on shelf of console.

ÞSecure television down with two straps. Make absolutely certain that straps are tight.

P/N 8007132

Page 9 of 10

Rev. B

Image 9
Contents REV. B BJ Two people are required for installation Step #1 Remove the Face of the Console Step #2 Install brackets and straps Pre-drill 1/8 pilot holes on bottom TV shelf for strap Rev. B Step #3 Install Console to Floor of Vehicle Step #4 Install VCP Into Console Step #5 Install TV Into Console Step #6 Replace the Face of the Console