To cancel the Minute Timer:
Press Timer Off pad.
PRESS YOU SEE
(time of day)
Starting a function
After programming a function, you must press the Start/Enter pad to start the function. If you do not press the Start/Enter pad within 5 seconds of programming, “START?” will show on the display as a reminder.
Canceling a function
The Off/Cancel pad will cancel any function except for the Clock and Timer Set functions. When you press the Off/ Cancel pad, the display will show the time of day or, if Minute Timer is also being used, the time remaining.
Audible signals
Audible signals tell you if a function is entered correctly or not. They also tell you when a cycle is completed.
To shut off all signals except for the
Press and hold the Stop Time pad for 5 sec- onds. A short tone will sound to tell sTop you the signals have been changed.
D
TIME Repeat the above step to turn the signals back on.
To choose between high and low volume signals:
Press and hold the Delay Start Time pad for 5 seconds. A short tone will sound to tell you the signals have been changed. Either “HI”or “LO”will appear on the time display to show the volume you chose.
15