Whirlpool W10196160D Replace Oven Racks Warming Drawer, Adjust Oven Bake Burner Flame if needed

Page 10

3.You can check the burner flame by removing the flame spreader or by using a mirror.

Remove flame spreader:

Remove 2 screws from the front tabs of the flame spreader. Lift front of the flame spreader and pull forward to remove tabs from rear of oven.

Using a mirror:

Insert a mirror to one side of the burner. Look into the mirror to check flame.

A

B

C

D

A.Mirror

B.Flame spreader

C.Flame reflection

D.2 screws

4.Push the BAKE pad.

5.Press the START pad.

The oven bake burner should light within 8 seconds. Under certain conditions it may take the burner up to 50 to 60 seconds to light.

Electronic igniters are used to light the bake and broil burners.

Refer to the Use and Care Guide for proper operation of the oven controls.

Adjust Oven Bake Burner Flame (if needed)

1.On models with a warming drawer, remove access cover plate (1 screw) located at the back of the warming drawer compartment.

2.Check the oven bake burner for proper flame.

This flame should have a ½" (1.3 cm) long inner cone of bluish-green, with an outer mantle of dark blue, and should be clean and soft in character. No yellow tips, blowing or lifting of flame should occur.

3.If the oven bake flame needs to be adjusted, locate the air shutter near the center rear of the range. Loosen the locking screw and rotate the air shutter until the proper flame appears. Tighten locking screw.

B

A

A. Air shutter

B. Locking screw

4.Push CANCEL/OFF when finished.

5.Reinstall flame spreader and oven bake burner cover.

Check Operation of Oven Broil Burner

1.Close the oven door.

2.Press the BROIL pad.

3.Press the START pad.

The oven burner should light within 8 seconds. Under certain conditions it may take the burner up to 50 to 60 seconds to light.

Refer to the Use and Care Guide for proper operation of the oven controls.

Adjust Oven Broil Burner Flame (if needed)

Look through oven window to check broil burner for proper flame. This flame should have a ½" (1.3 cm) long inner cone of bluish- green, with an outer mantle of dark blue, and should be clean and soft in character. No yellow tips, blowing or lifting of flame should be present.

If flame needs to be adjusted:

1.Loosen the lock screw on the air shutter located at the rear of the broil burner.

2.Adjust the air shutter as needed.

3.Tighten lock screw.

A

B

A. Lock screw

4.Press CANCEL/OFF when finished.

Replace Oven Racks and

Warming Drawer

Replace oven racks in oven cavity. Replace warming drawer.

To Replace Warming Drawer:

1.Insert warming drawer into slide rails on sides of drawer opening.

2.Lift front of drawer slightly and push firmly to close drawer.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Instructions D’INSTALLATION DES Cuisinières À GAZ Range SafetyWhat to do if YOU Smell GAS Tools and Parts Installation RequirementsLocation Requirements Product Dimensions Cabinet DimensionsType of Gas Electrical RequirementsGas Supply Requirements Gas Supply LineGas Pressure Regulator Gas Supply Pressure TestingUnpack Range Burner Input RequirementsMake Gas Connection Install Anti-Tip BracketTypical rigid pipe connection Complete Connection Verify Anti-Tip Bracket LocationTypical flexible connection Plug into a grounded 3 prong outletLevel Range Electronic Ignition SystemReplace Oven Racks Warming Drawer Adjust Oven Bake Burner Flame if neededAdjust Oven Broil Burner Flame if needed Check Operation of Oven Broil BurnerStorage Drawer Complete InstallationIf you need Assistance or Service To RemoveTo Convert Gas Pressure Regulator GAS ConversionsLP Gas Conversion To Convert Surface BurnersTo Convert Oven Bake Burner Complete InstallationTo Convert Oven Broil Burner Natural Gas Conversion Stamped number Sécurité DE LA Cuisinière Votre sécurité et celle des autres est très importanteEmplacement d’installation Exigences D’INSTALLATIONOutillage et pièces Dimensions de lappareil Dimensions du placardType de gaz Spécifications électriquesSpécifications de l’alimentation en gaz Gaz naturelDébit thermique des brûleurs Canalisation dalimentation en gazDétendeur Tests de pressurisation de la canalisation de gazDéballage de la cuisinière Instructions DinstallationInstallation de la bride antibasculement Sur les cuisinières équipées d’un tiroir de remisageRaccordement typique à une canalisation rigide Déplacer la cuisinière vers son emplacement final enRaccordement à la canalisation de gaz Sous la cuisinièreRaccordement typique par raccord flexible Vérification de lemplacement de la Bride antibasculementMise à niveau de la cuisinière Compléter le raccordementSi le brûleur ne sallume pas correctement Système dallumage électroniqueAllumage initial et réglages des flammes Réglage de la taille des flammesUtilisation dun miroir Contrôle du fonctionnement du brûleur du grilPour ôter le répartiteur de flammes Sil est nécessaire de régler la taille des flammesAchever l’installation Réinstallation des grilles du four et du Tiroir-réchaudTiroir De Remisage Conversion de Gaz naturel à Propane Conversions Pour Changement DE GAZConversion du détendeur Conversion du brûleur du four Conversion des brûleurs de la table de cuissonÔter les grilles du four Conversion de Propane à Gaz naturel Achever linstallationConversion du brûleur du gril Marquage didentification Conversion du brûleur du four W10196160D

W10196160D specifications

The Whirlpool W10196160D is a cutting-edge appliance designed to enhance the functionality and efficiency of modern kitchens. This product is particularly known for its reliability and user-friendly features, making it a preferred choice for homeowners and culinary enthusiasts alike.

One of the standout features of the Whirlpool W10196160D is its advanced technology that ensures optimal performance. The appliance incorporates Smart Sensor technology, allowing it to automatically detect the proper cycle settings based on the type of food being cooked. This innovative feature helps in achieving perfect cooking results every time while minimizing energy usage.

The W10196160D also boasts a spacious capacity, accommodating large meals and multiple dishes simultaneously. This is particularly beneficial for families or those who frequently entertain guests. The interior design is engineered for easy cleaning, with smooth surfaces that resist stains and odors, maintaining hygiene and a pristine appearance over time.

Energy efficiency is a hallmark of the Whirlpool brand, and the W10196160D is no exception. It meets rigorous energy-saving guidelines, which not only reduces environmental impact but also leads to lower utility bills. The appliance operates quietly, allowing you to enjoy conversations in your kitchen without disruptive noises.

Another feature of the Whirlpool W10196160D is its intuitive control panel. It features simple touch controls that enable users to easily adjust settings and monitor cooking progress. The clear display provides all necessary information at a glance, making it perfect for those who may not be tech-savvy.

Safety is also a primary consideration in the design of the W10196160D. It comes equipped with child lock features, ensuring that the appliance remains secure and functions safely in homes with young children. Additionally, its durable construction is designed to withstand the rigors of everyday use.

In summary, the Whirlpool W10196160D is an impressive appliance characterized by its smart technology, large capacity, energy-efficiency, user-friendly interface, and enhanced safety features. This makes it an ideal addition to any kitchen, combining function with style while delivering exceptional cooking results.
Top Page Image Contents