Verify Anti-Tip Bracket Location

1.Apply pipe-joint compound made for use with LP gas to all pipe thread connections.

2.Using a pipe wrench to tighten, connect the gas supply to the range.

2.Open the manual shutoff valve in the gas supply line. The valve is open when the handle is parallel to the gas pipe.

A. Gas pressure regulator

B. 90° elbow (must have ½" male pipe thread)

C.Nipple

D.Union

E.Black iron pipe

I H

F. Manual gas shutoff valve G. ½" or ¾" gas pipe

H.Nipple

I.Union

J.90° elbow

A. Closed valve

B. Open valve

3.Test all connections by brushing on an approved noncorrosive leak-detection solution. If bubbles appear, a leak is indicated. Correct any leak found.

4.Remove cooktop burner caps and grates from parts package. Burner caps should be level when properly positioned. If burner caps are not properly positioned, surface burners will not light. Place burner grates over burners and caps.

A C

A. Burner base

B. Burner cap

Typical flexible connection

1.Apply pipe-joint compound made for use with LP gas to the smaller thread ends of the flexible connector adapters (see B and G in following illustration).

2.Attach one adapter to the gas pressure regulator and the other adapter to the gas shutoff valve. Tighten both adapters.

3.Use a ¹⁵⁄₁₆" combination wrench and channel lock pliers to attach the flexible connector to the adapters. Check that connector is not kinked.

A B C

	H G	F
A. Gas pressure regulator	E. Manual gas shutoff valve
B. Use pipe-joint compound.	F. ½" or ¾" gas pipe
C. Adapter (must have ½" male	G. Use pipe-joint compound.
pipe thread)	H. Adapter
D. Flexible connector

Complete Connection

1.Check that the gas pressure regulator shutoff valve is in the “on” position.

A. Gas pressure regulator shutoff valve

C. Burner grate

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

5.Plug into a grounded 3 prong outlet.

1.On models with a storage drawer, remove the storage drawer. See “Storage Drawer” section for instructions.

On models with a warming drawer, the rear leg cannot be seen by removing the warming drawer. It will be necessary to view the rear foot from outside the range.

2.To check that the anti-tip bracket is installed, use a flashlight and look underneath the bottom of the range.

■ Look for the anti-tip bracket securely attached to floor.

W10196160D specifications

The Whirlpool W10196160D is a cutting-edge appliance designed to enhance the functionality and efficiency of modern kitchens. This product is particularly known for its reliability and user-friendly features, making it a preferred choice for homeowners and culinary enthusiasts alike.

One of the standout features of the Whirlpool W10196160D is its advanced technology that ensures optimal performance. The appliance incorporates Smart Sensor technology, allowing it to automatically detect the proper cycle settings based on the type of food being cooked. This innovative feature helps in achieving perfect cooking results every time while minimizing energy usage.

The W10196160D also boasts a spacious capacity, accommodating large meals and multiple dishes simultaneously. This is particularly beneficial for families or those who frequently entertain guests. The interior design is engineered for easy cleaning, with smooth surfaces that resist stains and odors, maintaining hygiene and a pristine appearance over time.

Energy efficiency is a hallmark of the Whirlpool brand, and the W10196160D is no exception. It meets rigorous energy-saving guidelines, which not only reduces environmental impact but also leads to lower utility bills. The appliance operates quietly, allowing you to enjoy conversations in your kitchen without disruptive noises.

Another feature of the Whirlpool W10196160D is its intuitive control panel. It features simple touch controls that enable users to easily adjust settings and monitor cooking progress. The clear display provides all necessary information at a glance, making it perfect for those who may not be tech-savvy.

Safety is also a primary consideration in the design of the W10196160D. It comes equipped with child lock features, ensuring that the appliance remains secure and functions safely in homes with young children. Additionally, its durable construction is designed to withstand the rigors of everyday use.

In summary, the Whirlpool W10196160D is an impressive appliance characterized by its smart technology, large capacity, energy-efficiency, user-friendly interface, and enhanced safety features. This makes it an ideal addition to any kitchen, combining function with style while delivering exceptional cooking results.