Whirlpool W10325493A Mobile Home Additional Installation Requirements, Installation Clearances

Page 4

Mobile Home - Additional Installation Requirements

The installation of this range must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280). When such standard is not applicable, use the Standard for Manufactured Home Installations, ANSI A225.1/NFPA 501A or with local codes.

In Canada, the installation of this range must conform with the current standards CAN/CSA-A240 - latest edition, or with local codes.

Mobile home installations require:

When this range is installed in a mobile home, it must be secured to the floor during transit. Any method of securing the range is adequate as long as it conforms to the standards listed above.

Product Dimensions

Freestanding Range

26 3/4"

(67.9 cm)36"

(91.4 cm)

42" (106.7 cm)

24 1/4"

29 7/8" (75.9 cm)

(61.6 cm)

Installation Clearances

Cabinet opening dimensions shown are for 25" (64.0 cm) countertop depth, 24" (61.0 cm) base cabinet depth and 36" (91.4 cm) countertop height.

If the cabinet depth is greater than 24" (61.0 cm), oven frame must extend beyond cabinet fronts by ½" (13.0 mm) minimum.

IMPORTANT: If installing a range hood or microwave hood combination above the range, follow the range hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface.

B D

C

A

E

G

K

F

J

I

H

A. 18" (45.7 cm) min. clearance upper side cabinet to countertop B. 13" (33 cm) max. upper cabinet depth

C. 30" (76.2 cm) min. opening width

D. For minimum clearance to top of cooktop, see NOTE*. E. 30¹⁄₈" (76.5 cm) min. opening width

F. 17" (43.2 cm)

G. This shaded area recommended for installation of rigid gas pipe. H. 2" (5.1 cm)

I. 4" (10 cm) J. 2" (5.1 cm)

K. 2" (5.1 cm) min. clearance from both sides of range to side wall or other combustible material.

*NOTE: 24" (61.0 cm) minimum when bottom of wood or metal cabinet is covered by not less than ¹⁄₄" (0.64 cm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.

30" (76.2 cm) minimum clearance between the top of the cooking platform and the bottom of an uncovered wood or metal cabinet.

IMPORTANT: Some cabinet and building materials are not designed to withstand the heat produced by the oven for baking and self-cleaning. Check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate or sustain other damage.

4

Image 4
Contents Table of Contents/Table des matières Range Safety Your safety and the safety of others are very importantTools and Parts Installation RequirementsLocation Requirements Mobile Home Additional Installation Requirements Product Dimensions Freestanding RangeInstallation Clearances Mobile home installations requireGas Supply Requirements Installation Instructions Install Anti-Tip BracketLine pressure testing above ½ psi gauge 14 WCP Line pressure testing at ½ psi gauge 14 WCP or lowerMake Gas Connection Verify Anti-Tip Bracket Location Level RangeTypical rigid pipe connection Typical flexible connectionIf the low flame needs adjusting Check OperationCheck Operation of Oven/Broil Burner To Light Standing Pilot LightsComplete Installation If the flame needs adjustingIf you need Assistance or Service Too much air of flame should occurGAS Conversions LP Gas ConversionTo Convert Gas Pressure Regulator Turn manual shutoff valve to the closed positionTo Convert Surface Burners To Convert Oven BurnerPilot and Bypass Screws Conversion Complete ConversionNatural Gas Conversion Set the front panel aside and locate the oven thermostatInstall Natural gas orifice spuds in the valves Pilot and Bypass Screws Conversion Sécurité DE LA Cuisinière Votre sécurité et celle des autres est très importanteExigences d’emplacement Exigences D’INSTALLATIONOutillage et composants Dimensions du produit Cuisinière autoportante Distances de dégagement à respecterSpécifications de l’alimentation en gaz Type de gazGaz naturel Conversion pour lalimentation au propaneCanalisation dalimentation en gaz DétendeurDébit thermique des brûleurs Tests de pressurisation de la canalisation de gazInstructions D’INSTALLATION Installation de la bride antibasculementDéballage de la cuisinière Fixer le gabarit avec du ruban adhésifRaccordement au gaz Vérification de lemplacement de la bride Antibasculement Raccordement typique à une canalisation rigideRaccordement typique par raccord flexible Achever le raccordementContrôle du fonctionnement Réglage de laplomb de la cuisinièrePour allumer les témoins de veilleuse Remettre en place le bouton de commande Contrôle du fonctionnement du four Brûleur du grilSi la flamme basse doit être réglée Ouvrir la porte du grilAchever l’installation Si vous avez besoin d’assistance ou de serviceSi la flamme doit être réglée Si la cuisinière ne fonctionne pas, contrôler ce qui suitConversions Pour Changement DE GAZ Conversion pour lalimentation au propaneConversion du détendeur Placer le robinet d’arrêt manuel à la position ferméeConversion du brûleur du four Conversion des brûleurs de surfaceImportant Ne pas serrer excessivement Conversion des veilleuses et des vis de Dérivation Terminer la conversionConversion au gaz naturel Conversion du brûleur du four Terminer la conversion

W10325493A specifications

The Whirlpool W10325493A is a high-performance appliance that brings efficiency and convenience to modern kitchens. As a part of Whirlpool's commitment to innovative technology, this model embodies a range of features designed to enhance cooking experiences.

One of the standout features of the W10325493A is its advanced cooking technology. It includes a powerful convection system that ensures even heat distribution around meals, promoting uniform cooking and browning. This is particularly beneficial when roasting or baking large items, as it reduces cooking time and ensures that every inch of food is perfectly treated.

In addition to its convection feature, the W10325493A also boasts a user-friendly touch control panel. This panel allows users to easily select desired cooking modes, temperatures, and times with just a few taps. The intuitive interface makes it accessible for all skill levels, from novice cooks to seasoned chefs. Furthermore, its digital display provides clear visibility of cooking settings, helping users keep track of their culinary tasks.

Another remarkable characteristic of the W10325493A is its spacious interior. With ample cooking space, this appliance accommodates large dishes without compromise. Whether preparing a family feast or entertaining guests, the generous capacity makes it easier to manage multiple items simultaneously. This versatility is complemented by adjustable racks that provide flexibility in organizing cooking trays and pans.

Energy efficiency is another critical feature of the W10325493A. With its eco-friendly design and energy-saving modes, this appliance minimizes energy consumption without sacrificing performance. This not only reduces utility bills but also reflects a commitment to environmental sustainability.

The W10325493A also integrates smart technology capabilities. With Wi-Fi connectivity, users can monitor and control the appliance remotely via a smartphone app. This feature allows for setting timers, adjusting temperature settings, and even receiving notifications when dishes are ready, making it a convenient addition to any busy household.

Lastly, the sleek and modern exterior of the W10325493A complements any kitchen aesthetic. Its stainless-steel finish is not only visually appealing but also easy to maintain, ensuring it looks great for years to come.

In summary, the Whirlpool W10325493A is a multifaceted appliance that combines advanced cooking technology, user-friendly features, energy efficiency, and smart connectivity, making it an excellent choice for enhancing culinary experiences in any home.