To remove rack, pull forward until rack stops, lift and pull.
Gasket
B10
@E0
To replace the oven light, remove glass cover and gasket.
Oven rack positions
Your oven has two racks. Always put the racks where you want
them to be before you turn on the oven.
To remove a rack. take hold of it on the front edge and pull it out until it stops. Then lift up the front edge and pull again. It will slide past the stops. out of the guides and out of the oven.
To put it back, fit the back corners into the guides at each side of
the oven and slide it in. keeping the front tilted up until the rack passes the stops in the rack guides.
For: | Place Rack: |
|
Baking | On the second or third rack guide | from the top.. |
| so food is in the center of the oven. | |
Broiling | So food is about the distance from | the broil |
| element suggested in the broiling ttmetable | |
| under “Usingthe Oven Controls.” |
|
Roasting LARGE | On the bottom rack guides. |
|
cuts of meat |
|
|
Roasting | So food is in the center of the oven. | |
SMALLER |
|
|
cuts of meat ~___
When baking, always leave at least 1% to 2 inches
For best results. get additional information on placing pans. cookte sheets and other utensils from the “Cooking Guide.”
Using the oven light
The Oven Ltght will come on when the Oven Door ISopened.
To replace the light bulb:
The oven light bulb has a glass cover which is held on by a wtre holder. This cover must be in place when the oven is being used.
1.Turn off the electric power at the main power supply.
2.Pull out on the wire holder and move it to one side. This will let you remove the glass cover and gasket.
3.Replace the bulb with a
4.Replace the gasket and glass cover. Snap the wire holder in place.