CARING FOR YOUR RANGE
COIL ELEMENTS AND REFLECTOR BOWLS (MODEL RF377PXG)
Removing
1.Make sure all coil elements are off and cool before removing coil elements and reflector bowls.
OFF
BAKE
2.Push in the edge of the coil element, opposite the receptacle. Then lift it just enough to clear the reflector bowl.
3.Pull the coil element straight away from the receptacle.
4.Lift out the reflector bowl. See the “Cleaning chart” earlier in this section for cleaning instructions.
Replacing
1.Make sure all coil elements are off and cool before replacing coil elements and reflector bowls.
OFF
BAKE
continued on next page
35