Whirlpool RF366PXD, RF366BXD warranty Anti-tip bracket, Optional door panel pat

Page 21

The anti-tip bracket

The range will not tip during normal use. However, tipping can occur if you apply too much force or weight to the open door without the anti-tip bracket properly secured.

Tip Over Hazard

Connect anti-tip bracket to the range feet.

Reconnect anti-tip bracket, if the range is moved.

Do not push down on the open oven door.

Follow the installation instructions.

Do not let children climb onto the oven door.

Failure to do so can result in death, burns, or other injury.

To

verify

the

anti-tip

bracket

To

verify

the

anti-tip

bracket

is

engaged

(if

you

have a floor

is engaged

(if

you

have a wall

bracket):

 

 

 

brat

ket):

 

 

 

l Remove the storage drawer. (See page 20.)

Cable

l

l

l

Rear leveling

leg

Floor bracket

Look to see if the anti-tip bracket is attached to floor with screws.

Make sure one rear leveling leg is posi- tioned under the anti-tip bracket.

See Installation Instructions for further details.

(attached to rear of control panel)

l Look to see if the anti-tip bracket is attached with screws to the wall behind the control panel.

l Make sure the cable on the back of the range is secured by the two hooks on the bracket.

. Cable must be unhooked from wall bracket to move range for cleaning or service. Reconnect cable before using range.

l See Installation Instructions for further details.

Optional door panel pat

If you would like to change the color of your oven door glass to white or almond, you can order one of these kits from your Whirlpool Dealer. The kits include easy installation instructions.

Model

RF366PXD:

Model

RF366BXD:

l White

(Kit No. 814324)

l White

(Kit No. 814071)

l Almond (Kit No. 814325) l Almond (Kit No. 814072)

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Know Your Range Using Self Cleaning Cycle SafetyTroubleshooting Index WarrantyContents Please record your model’s information Thank you for buying a WHIRLPOOL@ applianceYour safety is important to us Range SafetyOn next @Disconnect the electrical supply before servicing the range Control Panel Getting to Know Your RangeUsing the surface units Using Your RangeSurface unit indicator lights Hot surface indicator lightsCookware tips Using the ceramic glass cooktopPositioning racks Rack placement for specific foodsPans Home canning informationFor best air circulation Using aluminum foil for bakingUsing the Minute Timer Setting the clockPosition racks Baking/roastingPut food in oven After cooking, turn off ovenAdjusting the oven temperature control When broiling is done, turn off oven Set Oven Selector and Oven Temperature Control Knob toBroiling Position rackTo custom broil at a lower temperature Broiling rack position chartRack Position Type of Food Energy saving tips Broiling tipsUsing the MEALTIMER’ clock Page Storage drawer Oven ventOptional door panel pat Anti-tip bracketBefore you start Using the Self-Cleaning CycleSetting the controls Move the Lock Lever to Right-the Clean positionSet the Oven Selector and Oven Temperature Control Knob to Do not Force the Lock Lever. Wait until it moves easily How the cycle works Special tipsCaring for Your Range Cleaning the cooktopCleaning tips If There areWhat to do Part What To USE HOW to Clean Cleaning Other Range PartsPart What To USE Oven lightOther possible problems and their causes TroubleshootingProblem If nothing operates, check the followingProblem Cause If you need service ServiceIf you need FSP@ Replacement parts If you are not satisfied with how the problem was solvedIndex Warranty Cleantop Freestanding Range WarrantyWill PAY for Full ONE-YEAR Full FIVE-YEAR
Top Page Image Contents