Aiwa CX-ZL10 Insert the tape to be recorded on into Deck, Press on Deck 1 to start recording

Page 13

RECOR091UG

Preparation

“Use Type I (normal) tapes only.

“Set the tape to the point where recording will start.

●Note that recording is done on only one side of the tape

1Insert the tape to be recorded on into Deck 1.

Insert the tape with the side to be recorded on first facing out from the unit.

2 Press one of the function buttons and prepare the source to be recorded.

To record from a CD, press CD and load the disc(s).

To record from a ta~e, press TAPE. Then, insert the original tape into Deck 2 and play it.

To record from a radio broadcast, press TUNER/BAND and tune in to a station.

To record from a connected source, press VIDEO/AUX/ PHONO and play.

3Press ● on Deck 1 to start recording.

~is depressed simultaneously.

When the selected function is CD, playback and recording start simultaneously.

To stop recording, press WA on Deck 1.

To pause recording, press II on Deck 1.

To resume recording, press it again.

To record selected tracks of the CD

Before pressing ● , program the tracks (see page 12).

To record part of the CD

4f

When ● is pressed, recording always starts from the first track.

~

To start in the middle of a track, play the CD first and press I I SET

~

for CD at the point you wish to start recording from. Then, pr[?ss

 

●. The pause mode for CD button is released automatically &

and recording starts.

 

n

 

 

Q

Sound adjustment during recording

 

 

The output volume and tone of the speakers

or headphones tare

~

freely varied without affecting the recording.

 

2

 

 

E

. Do not press the buttons on Deck 2 during

recording.

$

●● cannot be depressed if the erasure prevention tab on the ~ side of the tape to be recorded is broken off.

To erase a recording

A previous recording is erased when a new recording is made on that part of that tape.

1Insert the tape you want to erase into Deck 1.

2Press TAPE and stop all the tape operation in Deck 2.

3Wind UPthe tape to the point where the erasure is to be started.

4Press O on Deck 1 to”start the erasure.

About cassette tapes

. To prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver or other ~ointed tool.

Side A

Tab for side A

 

To record on the tape again, cover the tab openinge witlh adhesive tape, etc.

●120-minute or longer tapes are extremely thin and easily

deformed or damaged. They are not recommended, wTake up any sfack in the tape with a pencil or similar toed

before use. Slack tape may break or jam in the mechamisml.

ENGLISH ‘t 3

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Digital Audio Diii3if2NEC-NATIONALELECTRICALCODE Remote Control Do not Attempt to Service the Unit YourselfSetting the Clock Setting the Timer TurntableConnect thesupplied antennas PFfiipAi!AWONSConnect the right and left speakers to the main unit Connect the AC cord to an AC outletConnect the supplied antennas Connect the stereo turntable to the main unitTo stand the AM antenna on a surface To use Shift on the remote controlTo connect other optional equipment+ ShiftfunctionTo turn the unit on To reset the game DemoPress Demo so that the game Demo displays Press E Press onceTo cancel the selected mode Sound adjustment during recordingRock ClassicPress 4 Down or -UP to select a station PressTUNER/BAND to select the FM or AM bandRepeat steps 1 Press TAPE, then press /A to open the cassette holder Usable tapesPress to start tday Press CD/CD Blank Skip on the main unit To dav all discs in the disc compartment, press EPress E to start playback Press one of Disc Direct Play 1-3 to select a disc Press Prgm while pressing Shift in stop modePress numbered buttons O-9 and +1 Oto program a track Press on Deck 1 to start recording Insert the tape to be recorded on into DeckPress on Deck 1 to start recording on the first side Insert the tape into DeckRepeat for the rest of the tracks for side @ ‘,m To designate the tape lengthTurn over the tape in Deck 1 and press to start recording PrgmeditTo view the clock when another display is in the display Press Clock once while pressing Shift on the remote controlTo switch to the 24-hour standard To cancel the sleep timerAdjust the volume Press Power to turn off the powerGet ready for the Tape function or the timer recording Prepare the sourceWhen connecting a turntable Adjust the volume to minimumPress VIDEO/AUX/PHONO on the main unit CD Digital OUT Optical VIDEO/AUX PhonoPlay the connected equipment Press VIDEO/AUX/PHONOSound is emitted from one speaker only There is no soundFM tuner section Tuner SectionCopyright Cable de alimentacion de CA Eneraia electricaInstalacion Sintonizacion Ecualizador GraficoPreajuste OperacionesConecte Ias antenas suministradas Antes de conectar e! cable de CAConecte el cable de alimentacion de CA a una toma de CA ImportanteConecte el plato giradiscos estereo a la ulnidad principal Antes de conectar ei cable de CAEl blanco a la toma VIDEO/AUX Phono in L Conexion DE UNA Antena Exterior Pulse una vez Sistema Super T-BASS Control DE VolumenPulse T-BASS EEyjLRECllEPCiON DE LA Radio Sintonizacion Mediante Numero DE PreajustePuke TUNER/BAND para seleccionar la banda de FM o de AM Puhe 44 Down o -UP para seleccionar una emisoraPulse TAPE, Iuego pulse WA para abrir el portacasete Introduction DE DiscosPulse F para iniciar la reproduction Cintas utilizableDE Reproduction Reproduction DE DiscosReproduction CON Salto DE -‘ Secciones EN Blanco Pulse CD/CD Blank Skip de la unidad principalPara borrar el programa Para aiiadir canciones al programaPulse . de la platina 1 para iniciar la grabacion Inserte la cinta que vaya a grabar en la platinaLas cintas de 120 minutes o mas son extremaolamente Para eliminar el programa editado Inserte la cinta en la platinaClose Tiempo de Ias cintas de cassette y tiempo de editionCara B de la cinta cara trasera Pulse CD EDIT/CHECK Mientras pulsa Shift delPara detener la grabacion Para cambiar el programa de cada caraSi parpadea la visualization del reloj PulseDesconecte la alimentacion ESPA~OLPulse Power para desconectar la alimentacion Ajuste el volumenPrepare la fuente de sonido Ajuste el volumen segun sus preferencias Ajuste el volumen al minimoPulse VIDEO/AUX/PHONO de la unidad principal Inicie la reproduction en el plato giradiscosHaga la reproduction en el equipo conectado Pulse VIDEO/AUXIPHONOGE51ERAlJDADES Seccion DEL Sintonizador GeneralidadesSeccion DE LA Platina Derechos DE Autor ~ F,LDEDESCENTEDANTENNE CX-ZL1 O SX-ZLIO NE PAS Essayer DE Reparer SOI-MEME LappareilRaccordements Z-LIO RACCORDEMENTSZ-L11 Reglages Audio Egaliseur GraphiqueVoir /a suite Raccordez Ies antennes fourniesRaccordez Ie cordon d’alimentation secteur sur Flaccordez Ie tourne-disque stereo a I’appareil principalUne prise de courant Quand remplacer Ies piles ExterieureFunction Appuyez deux fois sur pour arr6ter Ies deux autres chiffres Appuyez une fois surPour annuler Ie mode selectionnb Pour selectionner avec la telecommandeAppuyez sur T-BASS Utilisation d’un casqueAppuyez sur TUNER/BAND pour selectionner la gamme FM ou AM Accord PAR Numero DE PrereglageAtmwez sur 44 Down ou UP pour s61ectionner we station ~~‘Appuyez sur b pour commencer la lecture Appuyez sur Tape puis sur /4 pour ouvrir Ie porte-cassetteiCD EDIT/CHECK Disc Direct PLAY1-3 Randomi Repeat Saljt DES -BLANCS ’‘’--’ LectureAppuyez sur CD/CD Blank Skip de I’appareil Appuyez sur pour demarrer la lecturePour programmer une plage Appuyez sur Ies touches numeriques Oa 9 et +10Appuyez sur de la platine 1 pour commencer ’enregistrement Inserez la cassette a enregistrer clans la platinePour verifier I’ordre des numeros des plages programm~es Pour arr~ter I’enregistrementSur + ou -. Numeros des plages Programmers Numero de plage Plage Inserez la cassette clans la platineRepetez I’etape 5 pour Ie reste des plages de la face a Pour arreter I’enregistrementSi I’affichage de I’horloge clignote Appuvez surPour verifier Ie temps restant avant la mise hors tension Appuyez sur Power pour mettre I’appareil hors Tension Reglez Ie volumePreparez la source Preparez la fonction Tape ou I’enregistremernt programmeReglez Ie volume selon vos preferences Reglez Ie volume au minimumPreparation Lancez la lecture du disque sur Ie tourne-disqueMettez 11’appareilraccorde en marche Appuyez sur VIDEO/AUX/PHONODerechos DE Autor Page Page Name/Nombre/Nom Page/Pagina/Page Name/Nombre/NomPage/Pagina/Page=opENtcLosE

CX-ZL10 specifications

The Aiwa CX-ZL10 is a dynamic and versatile compact stereo system, known for its impressive audio performance and user-friendly features. It seamlessly combines style, functionality, and technology, making it a desirable choice for music enthusiasts.

One of the standout features of the CX-ZL10 is its advanced audio system. Equipped with a powerful amplifier, it produces clear and dynamic sound across a wide frequency range. The system supports various audio formats, allowing users to play CDs, tapes, and radio with ease. The built-in CD player, compatible with CD-R/RW discs, ensures high-quality playback, while the cassette deck allows for the enjoyment of vintage tapes.

The CX-ZL10 also incorporates modern digital technology with its preset equalizer settings, enabling users to customize their listening experience according to their preferences. The bass and treble controls further enhance sound quality, making it suitable for different music genres. Additionally, the stereo system features a digital tuner with a memory function for storing favorite radio stations, ensuring that users can access their preferred channels with just the touch of a button.

Another notable characteristic of the Aiwa CX-ZL10 is its sleek and compact design. The system's modern aesthetic is complemented by an easy-to-read LCD display, which provides essential information such as track number and playback time. Its compact size makes it an ideal addition to any space, whether in a living room, bedroom, or office.

In terms of connectivity, the CX-ZL10 comes with multiple input options, allowing users to connect various external devices. The auxiliary input jack makes it easy to hook up smartphones, tablets, or other media players. Furthermore, headphone and microphone jacks enhance privacy and versatility, catering to diverse listening preferences.

The system’s user-friendly interface ensures that even those who are not tech-savvy can navigate through its features with ease. With straightforward buttons and controls, setting it up and adjusting the volume or track selection is simple.

Overall, the Aiwa CX-ZL10 is a well-rounded compact stereo system that excels in sound quality, design, and connectivity options. Its combination of classic audio playback capabilities and modern technology makes it a rewarding choice for anyone looking to enrich their audio experience.
Top Page Image Contents