Aiwa CX-ZL10 manual Press Clock once while pressing Shift on the remote control

Page 16

-. /,

[+Tj.. .—. -i~J... (J.

w

When the clock is set, the “:”between the hours and minutes flashes. When the power cord is plugged into an AC outlet for the first time after purchase or when the clock setting is canceled due to a power failure, the entire clock display flashes.

Use the remote control.

1 Press CLOCK once while pressing SHIFT on the remote control.

2

The unit can be turned off automatically at a specified time.

Use the remote control.

1 Press SLEEP while pressing SHIFT on the remote control.

2 Within 4 seconds, press 4 or -to designate the hour and the minute.

Holding these buttons down will vary the time rapidly.

3 Press II.

The clock starts from 00 seconds.

To view the clock when another display is in the display

Press CLOCK while pressing SHIFT. The time is displayed for 4 seconds and then the original display reappears. However, the clock cannot be displayed during recording.

To switch to the 24-hour standard

Press CLOCK once while pressing SHIFT and then press ■ within 4 seconds.

Repeat the same procedure to restore the 12-hour standard.

If the display flashes when the clock is displayed, it indicates that the clock has stopped due to a power failure or the removal

of the power cord. The current time needs to be reset.

~

2 Within 4 seconds, press + or -10 specify the time until the power is turned off.

The time “changesbetween 5 and 240 minutes in 5-minutf? steps.

Specified time

While the sleep timer is in operation, the display is dimmer than usual.

To check the time remaining until the power is turned off Press SLEEP once while pressing SHIFT. The remaining time

is displayed for 4 seconds.

To cancel the sleep timer

Press SLEEP twice while pressing SHIFT so that “SLEEF’OFF” appears on the display.

~6 ENGLISH

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Diii3if Digital Audio2NEC-NATIONALELECTRICALCODE Do not Attempt to Service the Unit Yourself Remote ControlSetting the Clock Setting the Timer TurntablePFfiipAi!AWONS Connect thesupplied antennasConnect the right and left speakers to the main unit Connect the AC cord to an AC outletConnect the stereo turntable to the main unit Connect the supplied antennasTo use Shift on the remote control To stand the AM antenna on a surfaceTo connect other optional equipment+ ShiftfunctionTo reset the game Demo To turn the unit onPress Demo so that the game Demo displays Press E Press onceSound adjustment during recording To cancel the selected modeRock ClassicPress 4 Down or -UP to select a station PressTUNER/BAND to select the FM or AM bandRepeat steps 1 Press TAPE, then press /A to open the cassette holder Usable tapesPress to start tday Press CD/CD Blank Skip on the main unit To dav all discs in the disc compartment, press EPress E to start playback Press one of Disc Direct Play 1-3 to select a disc Press Prgm while pressing Shift in stop modePress numbered buttons O-9 and +1 Oto program a track Insert the tape to be recorded on into Deck Press on Deck 1 to start recordingInsert the tape into Deck Press on Deck 1 to start recording on the first sideTo designate the tape length Repeat for the rest of the tracks for side @ ‘,mTurn over the tape in Deck 1 and press to start recording PrgmeditPress Clock once while pressing Shift on the remote control To view the clock when another display is in the displayTo switch to the 24-hour standard To cancel the sleep timerPress Power to turn off the power Adjust the volumeGet ready for the Tape function or the timer recording Prepare the sourceAdjust the volume to minimum When connecting a turntablePress VIDEO/AUX/PHONO on the main unit CD Digital OUT Optical VIDEO/AUX PhonoPress VIDEO/AUX/PHONO Play the connected equipmentThere is no sound Sound is emitted from one speaker onlyFM tuner section Tuner SectionCopyright Cable de alimentacion de CA Eneraia electricaInstalacion Ecualizador Grafico SintonizacionPreajuste OperacionesAntes de conectar e! cable de CA Conecte Ias antenas suministradasConecte el cable de alimentacion de CA a una toma de CA ImportanteConecte el plato giradiscos estereo a la ulnidad principal Antes de conectar ei cable de CAEl blanco a la toma VIDEO/AUX Phono in L Conexion DE UNA Antena Exterior Pulse una vez Control DE Volumen Sistema Super T-BASSPulse T-BASS EEyjSintonizacion Mediante Numero DE Preajuste LRECllEPCiON DE LA RadioPuke TUNER/BAND para seleccionar la banda de FM o de AM Puhe 44 Down o -UP para seleccionar una emisoraIntroduction DE Discos Pulse TAPE, Iuego pulse WA para abrir el portacasetePulse F para iniciar la reproduction Cintas utilizableReproduction DE Discos DE ReproductionReproduction CON Salto DE -‘ Secciones EN Blanco Pulse CD/CD Blank Skip de la unidad principalPara aiiadir canciones al programa Para borrar el programaPulse . de la platina 1 para iniciar la grabacion Inserte la cinta que vaya a grabar en la platinaLas cintas de 120 minutes o mas son extremaolamente Inserte la cinta en la platina Para eliminar el programa editadoClose Tiempo de Ias cintas de cassette y tiempo de editionPulse CD EDIT/CHECK Mientras pulsa Shift del Cara B de la cinta cara traseraPara detener la grabacion Para cambiar el programa de cada caraPulse Si parpadea la visualization del relojDesconecte la alimentacion ESPA~OLPulse Power para desconectar la alimentacion Ajuste el volumenPrepare la fuente de sonido Ajuste el volumen al minimo Ajuste el volumen segun sus preferenciasPulse VIDEO/AUX/PHONO de la unidad principal Inicie la reproduction en el plato giradiscosHaga la reproduction en el equipo conectado Pulse VIDEO/AUXIPHONOGE51ERAlJDADES Seccion DEL Sintonizador GeneralidadesSeccion DE LA Platina Derechos DE Autor ~ F,LDEDESCENTEDANTENNE NE PAS Essayer DE Reparer SOI-MEME Lappareil CX-ZL1 O SX-ZLIORaccordements Z-LIO RACCORDEMENTSZ-L11 Reglages Audio Egaliseur GraphiqueRaccordez Ies antennes fournies Voir /a suiteRaccordez Ie cordon d’alimentation secteur sur Flaccordez Ie tourne-disque stereo a I’appareil principalUne prise de courant Quand remplacer Ies piles ExterieureFunction Appuyez une fois sur Appuyez deux fois sur pour arr6ter Ies deux autres chiffresPour selectionner avec la telecommande Pour annuler Ie mode selectionnbAppuyez sur T-BASS Utilisation d’un casqueAccord PAR Numero DE Prereglage Appuyez sur TUNER/BAND pour selectionner la gamme FM ou AMAtmwez sur 44 Down ou UP pour s61ectionner we station ~~‘Appuyez sur b pour commencer la lecture Appuyez sur Tape puis sur /4 pour ouvrir Ie porte-cassetteiCD EDIT/CHECK Disc Direct PLAY1-3 Randomi Repeat Lecture Saljt DES -BLANCS ’‘’--’Appuyez sur CD/CD Blank Skip de I’appareil Appuyez sur pour demarrer la lectureAppuyez sur Ies touches numeriques Oa 9 et +10 Pour programmer une plageInserez la cassette a enregistrer clans la platine Appuyez sur de la platine 1 pour commencer ’enregistrementPour verifier I’ordre des numeros des plages programm~es Pour arr~ter I’enregistrementSur + ou -. Numeros des plages Programmers Numero de plage Inserez la cassette clans la platine PlageRepetez I’etape 5 pour Ie reste des plages de la face a Pour arreter I’enregistrementSi I’affichage de I’horloge clignote Appuvez surPour verifier Ie temps restant avant la mise hors tension Reglez Ie volume Appuyez sur Power pour mettre I’appareil hors TensionPreparez la source Preparez la fonction Tape ou I’enregistremernt programmeReglez Ie volume au minimum Reglez Ie volume selon vos preferencesPreparation Lancez la lecture du disque sur Ie tourne-disqueAppuyez sur VIDEO/AUX/PHONO Mettez 11’appareilraccorde en marcheDerechos DE Autor Page Page Name/Nombre/Nom Page/Pagina/Page Name/Nombre/NomPage/Pagina/Page=opENtcLosE

CX-ZL10 specifications

The Aiwa CX-ZL10 is a dynamic and versatile compact stereo system, known for its impressive audio performance and user-friendly features. It seamlessly combines style, functionality, and technology, making it a desirable choice for music enthusiasts.

One of the standout features of the CX-ZL10 is its advanced audio system. Equipped with a powerful amplifier, it produces clear and dynamic sound across a wide frequency range. The system supports various audio formats, allowing users to play CDs, tapes, and radio with ease. The built-in CD player, compatible with CD-R/RW discs, ensures high-quality playback, while the cassette deck allows for the enjoyment of vintage tapes.

The CX-ZL10 also incorporates modern digital technology with its preset equalizer settings, enabling users to customize their listening experience according to their preferences. The bass and treble controls further enhance sound quality, making it suitable for different music genres. Additionally, the stereo system features a digital tuner with a memory function for storing favorite radio stations, ensuring that users can access their preferred channels with just the touch of a button.

Another notable characteristic of the Aiwa CX-ZL10 is its sleek and compact design. The system's modern aesthetic is complemented by an easy-to-read LCD display, which provides essential information such as track number and playback time. Its compact size makes it an ideal addition to any space, whether in a living room, bedroom, or office.

In terms of connectivity, the CX-ZL10 comes with multiple input options, allowing users to connect various external devices. The auxiliary input jack makes it easy to hook up smartphones, tablets, or other media players. Furthermore, headphone and microphone jacks enhance privacy and versatility, catering to diverse listening preferences.

The system’s user-friendly interface ensures that even those who are not tech-savvy can navigate through its features with ease. With straightforward buttons and controls, setting it up and adjusting the volume or track selection is simple.

Overall, the Aiwa CX-ZL10 is a well-rounded compact stereo system that excels in sound quality, design, and connectivity options. Its combination of classic audio playback capabilities and modern technology makes it a rewarding choice for anyone looking to enrich their audio experience.
Top Page Image Contents