Gaggenau CM200610 manual Standby mode, Displaying number of!brews, Reset function

Standby mode

OFF IN

4HOURS

OFF IN

2HOURS

Displaying number of!brews

NO.BREWS

￿￿ ￿ 86

RESET function

De(activating the setting:

￿Set the time to --:-- rwithors￿.

Note: The current time must be set for this functio run.

i The switch(on time is retained even if there is￿a￿power failure or the main power switch1 is￿turned off.

This function is used to specify after how many ho following the last brew the appliance automatically switches to standby mode.

￿Hold down buttonq on display for at least 3￿seconds.

￿ Select OFF INwithr ors.

￿Press buttonq, hours display flashes.

￿Change the setting withr ors.

￿Press buttonq to save the setting.

￿	Press theo button. Back to			standby.
i	The switch(off	time	is retained	even if there is a
	power failure	or the	power switch1 is actuated.

The number of brewed espressos, coffees and preground coffees is displayed here. The number of brews are counted automatically.

￿Hold down buttonq on display for at least 3￿seconds.

￿Select NO.BREWS withr ors.

￿	Press theo button. Back to standby.
i	This number cannot be changed!

Possible from •standby" mode only

￿Simultaneously hold downr ands for at least

3￿seconds ) all saved settings are deleted.

i The display indicates the messages in the Germ language after the RESET function.

￿￿