2x |
Fig. 30 |
Note: the time of day that is set on the appliance is the starting point for programming the
You can query the entered value by pressing the 
(Timer) key twice.
Programming a
The appliance switches off automatically at a time that you have chosen. The starting point is the time of day set on the appliance.
Proceed as follows:
–Press the 
(Timer) key twice. The 
(End) and 
(Cooking time) symbols flash.
–Press the + or – key to set the required time. You can choose any
–Press the 
(Confirmation) key to confirm the entered value. An audible signal is sounded. The 
(Cooking time) symbol lights up on the display.
After the set time has elapsed, the 
(Cooking time) symbol flashes and an audible signal is sounded.
By pressing any key, you can switch off the signal and heating will start again. Turn the temperature selector switch to 0 to end the operation.
Programming a cooking time and an off time
This mode enables you to start and end baking and cooking in your absence.
Proceed as follows:
–Enter a required duration (see Page 16)
–Press the 
(Confirmation) key
–Enter the required
–Press the 
(Confirmation) key
The automatic mode becomes active as soon as the 
(Confirmation) key.
17