11.3 How to do it
The appliance must only be connected by an authorised specialist, paying attention to the relevant regulations of the power supply companies and the regional construction regulations.
The electrician is responsible for the correct functioning of the appliance at the time of installation. He should instruct the user on how to operate the appliance correctly on the basis of the Operating Instructions, and the user has to be instructed on how to disconnect the appliance in an emergency.
We accept no liability for damage caused by failure to comply with these instructions.
If it is not possible to disconnect the appliance from the mains via an easily accessible plug and permanent cable connection, an isolating switch with a contact clearance of at least 3 mm must be fitted on the installation side.
Repairs carried out improperly may involve substantial risks for you.
Connection to the power mains:
On the top of the appliance there is a cover that has to be unscrewed. The wiring diagram stuck onto the top of the appliance shows the connection variant.
For 230 V only: the oven is connected in one phase. (EB 270 – 1x16 A / EB 290 – 1x20 A)
For 400 V only: the oven is connected in two phases, i.e. L1, L2 and N.
The appliance must be earthed.
The manufacturer cannot be held liable for damages that might arise from improper or non- existent earthing of the appliance.
Screw the cover back on.
39