ADJUSTMENTS BEFORE OPERATIONS
En
Power
Turning the unit on
Press POWER 6STANDBY/ON (POWER on the remote control).
Or press FM, AM, VIDEO/AUX/DVD or CD, the playback will start automatically if a disc or tape is inserted.
Turning the unit off
Press POWER 6STANDBY/ON again.
The unit goes into standby.
Volume
Turn VOLUME (Press VOL N,M on the remote control).
Adjust from 0 (minimum) to 49 and MAX (maximum).
Tip:
Volume level setting is retained during
To change the left/right balance
Press MANUAL SELECT repeatedly on the remote control until "L/R" is displayed. Then, press f or g within 4 seconds.
•The front speaker level for the Dolby Digital and Dolby Pro Logic systems is changed as well.
DEMO
If the clock has not been set, a DEMO appears on the display when the unit is turned off.
To deactivate and activate the DEMO
Press DEMO/ECO.
Motorized Slide Window
Reveals and covers the operation buttons.
To move the Window up/down
Press Window UP or WINDOW DOWN.
To select AUTO or MANUAL mode
1 Press FUNCTION MODE repeatedly until "WINDOW" is displayed.
2 Turn MULTI JOG to select "AUTO" or "MANUAL" and then press ENTER.
If there is no MULTI JOG operation within 4 seconds, the setting is canceled.
AUTO mode
- The Window moves up and down automatically.
e.g.) It moves up when CD function is selected (CD is pressed).
MANUAL mode
-The Window moves up and down as you operate with WINDOW UP or WINDOW DOWN.
To display the current mode
Press FUNCTION MODE repeatedly until "WINDOW" is displayed and then press ENTER within 4 seconds. The mode will be displayed for 4 seconds.
Note on WINDOW
Do not place anything on the top of the Window (on the top of the unit).
10