Aiwa XS-DS70 manual Timer Operations, Sleep timer, Timer playback, To cancel the sleep timer

TIMER OPERATIONS

*Move the Window up to reveal the operation buttons with WINDOW UP if needed.

Sleep timer

Turns off the unit automatically after a specified time.

1Press SLEEP on the remote control. "SLP" appears on the display.

2Press f or g repeatedly to set the sleep timer duration.

With each press, the timer duration changes in 5-minute steps between 5 to 240 minutes. If there is no button input for 4 seconds, the current setting is entered automatically. The unit turns off after the selected time.

• MULTI JOG is also available in place of for g.

To check the remaining time until the unit turns off

Press SLEEP on the remote control. The remaining time is displayed for 4 seconds.

To cancel the sleep timer

Press SLEEP twice on the remote control so that "SLP oFF" is displayed.

Timer playback

Turns on the unit at a specified time for the specified duration. Make sure the clock is set correctly.

1Press one of the function buttons to select the desired playback source.

2Press FUNCTION MODE repeatedly until "TIMER" is displayed, turn MULTI JOG to select "PLAY" within 4 seconds, and then press ENTER within 4 seconds.

"5" indicator lights up, and the timer-on time and the source name appear alternately on the display.

On the remote control, press TIMER repeatedly until "PLAY" is displayed, and then go to the next step within 6 seconds.

3Press for gto set the timer-on time, then press aSET or ENTER.

• MULTI JOG is also available in place of for g.

4Press f or g to set the timer-activated duration, then press aSET or ENTER.

With each press, the timer-activated duration changes in 5-minute steps between 5 to 240 minutes.

If there is no button input for 4 seconds, the current setting is entered automatically.

• MULTI JOG is also available in place of for g.

5Adjust the volume and tone for timed playback. En

If the volume level is set to 21 or higher, it is automatically turned down to 20 when the unit is turned on by the timer.

6Prepare the source.

To play CD(s), load disc(s).

To play the radio, select the band and tune in to the desired station.

To play external equipment connected to the DIGITAL IN (PCM/DOLBY DIGITAL) OPTICAL (VIDEO) jack or the VIDEO/AUX jacks, set an external timer for the equipment so that its playback begins at the same time.

7Press POWER 6STANDBY/ON to turn the unit off.

"5" remains on the display to indicate the timer standby mode.

At timer-on time, the unit turns on and plays the selected source. After the specified timer-activated duration, the unit turns off again.

•Timer playback will not begin unless the unit is turned off first.

•Connected equipment cannot be turned on or off by the built- in timer of this unit. Use an external timer.

•The timer source can be changed with the function buttons before completing step 3.

21