Aiwa XS-DS70 manual CD Operations, Playback, Random/Repeat playback

Page 12

CD OPERATIONS

En

This unit plays back finalized CD-R/RW discs as well as audio CDs.

*Move the Window up to reveal the operation buttons with WINDOW UP if needed.

Playback

1Press CD and load disc(s)

Press zCD OPEN/CLOSE to open the disc compartment and place one or two disc(s) with the labeled side up. To place three discs, press DISC CHANGE so that the trays rotate, then place the third one. Lastly, close the compartment with zCD OPEN/CLOSE.

When loading an 8-cm (3-inch) disc, place it on the inner circle of the tray.

2To play all discs, press c.

To play one desired disc, press DISC DIRECT PLAY 1-3.

To stop playback

Press s.

To pause playback

Press a. Press again to resume playback.

To skip to the beginning of the current/preceding/ succeeding track

Press for grepeatedly or turn MULTI JOG.

To search (playback in fast forward or fast reverse)

Hold down for g. Release at the desired point.

To select a disc and a track with the remote control 1 Press CD DIRECT, and then press the numbered button (1-

3) within 3 seconds to select a disc.

2 Press the numbered buttons to select a track.

-To select track 25, press +10, +10 and 5.

-To select track 10, press +10 and 0.

To display the remaining playback time of the CD

Press REMAIN on the remote control. Press again to return to the elapsed time display.

Remaining playback time cannot be displayed during random playback or programmed playback.

To replace disc(s) during playback without interruption

While one disc is being played back, press DISC CHANGE so that the compartment opens, replace disc(s) with other one(s), and press DISC CHANGE to close the compartment.

Random/Repeat playback

Random playback plays all the tracks on one desired disc or all the discs in random order. Repeat playback plays all the tracks repeatedly on one desired disc or all the discs.

1Press RANDOM/REPEAT repeatedly on the remote control to select one of the following modes:

-Random playback: "RANDOM" lights up.

-Repeat playback: """ lights up.

-Random and repeat playback: "RANDOM" and """

lights up.

2To play one desired disc, press DISC DIRECT PLAY 1-3.

To play all discs, press c.

To cancel random/repeat playback

Press RANDOM/REPEAT repeatedly on the remote control so that both "RANDOM" and """ disappear on the display.

To repeat a selected set of tracks

Select the tracks with programmed playback, then press RANDOM/REPEAT on the remote control to select repeat playback.

It is impossible to play a selected set of tracks in random order.

12

Image 12
Contents Compact Disc Stereo System Precautions Explanation of Graphical SymbolsInstallation Electric PowerTable of Contents Preparations ConnectionSurround speaker Center speaker Main unit DVD player etc Subwoofer Front speakerSurround speakers and center speaker Cord with a plug, approx m / 9.8 ftConnect the front speakers 0terminalsRemote control Positioning the speakersParts and Controls Main unit rearDynamic Integrated Neo Amplifier Digital in PCM/DOLBY DigitalMain unit front Timer Power TUNER/BAND Window Down Window UP Remain PrgmAdjustments Before Operations PowerVolume Motorized Slide WindowECO mode Setting the clockDisplay color CD Operations PlaybackRandom/Repeat playback Programmed playback To check the programTo clear the program To add tracks to the programManual tuning Preset tuningTo clear a preset station Radio OperationsAdjustments To switch to monaural FM receptionTo switch the AM tuning interval AntennasListening to External Sources Playing a digital sourcePlaying an analog source Dolby SurroundTo cancel Dolby Pro Logic To select with the remote controlTo display the current Dolby Surround mode Playing Dolby Surround soundSubwoofer On or Off mode To stop speaker level adjustmentPress for gto adjust the delay time LFE is not available for Dolby Pro LogicPlay the Dolby Surround sound Sound Adjustments To cancel equalizationGraphic equalizer Super T-BASSTimer Operations Sleep timerTimer playback To cancel the sleep timerTo display the timer setting Timer setting mode and change the settingTo change the timer setting Re-set the timer againCare and maintenance TroubleshootingReference Specifications For assistance and information United States and Puerto Rico