Aiwa NSX-AJ800 manual Programmed playback, Blank skip play

Page 11

Programmed playback

Plays back up to 30 selected tracks in programmed order.

1Press SHIFT+PRGM on the remote control during stop.

"PRGM" lights up on the display.

2Press DISC DIRECT PLAY 1-3 to select a disc. Go to the next step when the tray stops rotating.

3Press the numbered buttons on the remote control to program a track.

The selected track number lights up on the display. -To select the 25th track, press +10, +10 and 5. -To select the 10th track, press +10 and 0.

4Repeat step 2 and 3 to program other tracks.

5Press d.

During programmed playback, you cannot select a disc or a track with the numbered buttons. "Can't USE" is displayed when you try to select a track .

If the total playback time of the program exceeds 99:59 minutes, or if a track with a track number exceeding 30 is programmed, the playing time is displayed as "- -:--".

You cannot program more than 30 tracks. "FULL" is displayed.

To check the program

Press for grepeatedly during stop. The disc number, track number and program number are displayed in succession.

To clear the program

Press sCLEAR during stop. "PRGM" disappears on the display.

To add tracks to the program

Repeat step 2 and 3 before starting playback. The tracks are added to the end of the program.

To change the programmed tracks

Clear the program and reselect the tracks in your desired order.

Blank skip play

Skips the silent portion between tracks on the disc.

1Press CD BLANK SKIP.

"CD BLANK SKIP ON" is displayed and "" appears on the display.

2Press d.

There may be a case where Blank skip play does not function correctly.

Blank skip play is canceled automatically when recording with program or random function (such as AI Edit Recording) starts.

To cancel Blank skip play

Press CD BLANK SKIP so that "CD BLANK SKIP OFF"

is displayed and "" disappears.

Notes on CDs

 

• Do not place more than one disc on one tray.

 

• Do not tilt the unit with discs loaded.

 

• The unit may not play a CD-R/RW disc recorded on personal

 

computers or certain kinds of CD-R/RW recorders.

 

• Do not attach adhesive label, etc. to either side of a CD-R/

 

RW disc, as doing so may cause malfunction.

En

• Do not load an unrecorded CD-R/RW disc. The disc may be

damaged.

 

• Do not use irregular-shaped CDs.

 

11

Image 11
Contents Compact Disc Stereo System Electric Power PrecautionsExplanation of Graphical Symbols InstallationTable of Contents To position the satellite speakers PreparationsConnection Connections are madeMain unit rear Remote controlParts and Controls Main unit front CD EDIT/CHECK Prgm Panel OPEN/CLOSE T-BASS Timer SleepVOLN,M Power Function Disc Direct PlayDemo Adjustments Before OperationsPower VolumeDimmer ECO modeSetting the clock Adjusts the brightness of the displayRandom/Repeat playback CD OperationsPlayback Blank skip play Programmed playbackRadio Operations Manual tuningPreset tuning To clear a preset stationDynamic Integrated Neo Amplifier AdjustmentsTo switch to monaural FM reception To switch the AM tuning intervalUse only type I normal tapes Tape OperationsBasic recording Edited CD recording Whole tape dubbingTo clear the edit program To change the program of each sideGraphic equalizer Sound AdjustmentsBBE Super T-BASSTo cancel Panorama Sound Plus Rear SP modeAmbient 1 mode Ambient 2 modeTo cancel the sleep timer Timer OperationsSleep timer Timer playbackTo cancel the timer Timer recordingTo display the timer setting To change the timer settingReference Care and maintenanceTroubleshooting Specifications For assistance and information United States and Puerto Rico