Aiwa NSX-AJ800 manual ECO mode, Dimmer, Setting the clock, Adjusts the brightness of the display

Page 9

ECO mode

Reduces power consumption with the following operations, etc.

ECO ON mode

-The unit blacks out when the unit is turned off. Only the red indicator lights up. (Only when the clock is set.)

-If dimmer mode is set to on, the unit illumination brightens (for 10 seconds) only when you operate the unit.

-When the unit turns on with the timer recording, the dimmer mode is set to dimmest and the volume is set to minimum.

ECO AUTO mode

-In addition to the operations of ECO ON mode, the unit automatically turns itself off if you do not operate the unit for 10 minutes.

1Press ECO once when the unit is turned on, and then within 4 seconds press ENTER.

2Turn MULTI JOG to select one of the ECO modes and then press ENTER.

If there is no MULTI JOG or button operation within 4 seconds, the setting is canceled.

To cancel the ECO mode

Repeat the above and select "ECO OFF".

Dimmer

Adjusts the brightness of the display.

1Press ECO twice when the unit is turned on, and then within 4 seconds press ENTER.

2Turn MULTI JOG to select one of the three dimmer modes or "DIM-OFF", and then press ENTER. "DIM-OFF" is the brightest and "DIMMER 3" is the dimmest.

If there is no MULTI JOG or button operation within 4 seconds, setting is canceled.

To cancel the dimmer

Repeat the above and select "DIM-OFF".

Setting the clock

1Press CLOCK(SHIFT+CLOCK on the remote control).

2Press for gto set the time.

Each press changes the time in 1-minute steps. Holding it down changes the time in 10-minute steps.

If for gis not pressed within 4 seconds, setting En is canceled.

MULTI JOG is also available in place of for g.

3Press ENTER or aSET.

The time display stops flashing and the clock starts from 00 seconds.

To display the time

Press CLOCK(SHIFT+CLOCK on the remote control).

The time will be displayed for 4 seconds, but it cannot be displayed during recording.

To switch to the 24-hour standard

Display the time and press swithin 4 seconds.

With each press, the clock alternates between the 12-hour standard and the 24-hour standard.

Tip:

In the 12-hour standard, "AM 12:00" indicates midnight and "PM 12:00" noon.

If the clock display flashes when the unit is turned off

There has been a power interruption. Re-set the clock.

9

Image 9
Contents Compact Disc Stereo System Explanation of Graphical Symbols PrecautionsInstallation Electric PowerTable of Contents Connection PreparationsConnections are made To position the satellite speakersRemote control Parts and ControlsMain unit rear Main unit front VOLN,M Power Function Panel OPEN/CLOSE T-BASS Timer SleepDisc Direct Play CD EDIT/CHECK PrgmPower Adjustments Before OperationsVolume DemoSetting the clock ECO modeAdjusts the brightness of the display DimmerCD Operations PlaybackRandom/Repeat playback Blank skip play Programmed playbackPreset tuning Manual tuningTo clear a preset station Radio OperationsTo switch to monaural FM reception AdjustmentsTo switch the AM tuning interval Dynamic Integrated Neo AmplifierTape Operations Basic recordingUse only type I normal tapes Edited CD recording Whole tape dubbingTo clear the edit program To change the program of each sideBBE Sound AdjustmentsSuper T-BASS Graphic equalizerAmbient 1 mode Rear SP modeAmbient 2 mode To cancel Panorama Sound PlusSleep timer Timer OperationsTimer playback To cancel the sleep timerTo display the timer setting Timer recordingTo change the timer setting To cancel the timerCare and maintenance TroubleshootingReference Specifications For assistance and information United States and Puerto Rico