Aiwa NSX-AJ800 manual CD Operations, Playback, Random/Repeat playback

Page 10

CD OPERATIONS

En

This unit plays back finalized CD-R/RW discs as well as audio CDs.

* Open the control panel with PANEL OPEN/CLOSE if needed.

Playback

1Press CD and load disc(s)

Press zCD OPEN/CLOSE to open the disc compartment and place one or two disc(s) with the labeled side up. To place three discs, press DISC CHANGE so that the trays rotate, then place the third one. Lastly, close the compartment with zCD OPEN/CLOSE.

When loading an 8-cm (3-inch) disc, place it on the inner circle of the tray.

2To play all discs, press d.

To play one desired disc, press DISC DIRECT PLAY 1-3.

To stop playback

Press s.

To pause playback

Press a. Press again to resume playback.

To skip to the beginning of the current/preceding/ succeeding track

Press for grepeatedly or turn MULTI JOG.

To search (playback in fast forward or fast reverse)

Hold down for g. Release at the desired point.

To select a disc and a track with the remote control Press DISC DIRECT PLAY 1-3 to select a disc and then press the numbered buttons to select a track.

-To select track 25, press +10, +10 and 5.

-To select track 10, press +10 and 0.

To display the remaining playback time of the CD Press CD EDIT/CHECK (SHIFT+CD EDIT/CHECK on the remote control). Press again to return to the elapsed time display.

Remaining playback time cannot be displayed during random playback or programmed playback.

To replace disc(s) during playback without interruption

While one disc is being played back, press DISC CHANGE so that the compartment opens, replace disc(s) with other one(s), and press DISC CHANGE to close the compartment.

Random/Repeat playback

Random playback plays all the tracks on one desired disc or all the discs in random order. Repeat playback plays all the tracks repeatedly on one desired disc or all the discs.

1Press SHIFT+RANDOM/REPEAT repeatedly on the remote control to select one of the following modes:

-Random playback: "RANDOM" lights up.

-Repeat playback: """ lights up.

-Random and repeat playback: "RANDOM" and """

lights up.

2To play one desired disc, press DISC DIRECT PLAY 1-3.

To play all discs, press d.

To cancel random/repeat playback

Press SHIFT+RANDOM/REPEAT repeatedly on the remote control so that both "RANDOM" and """ disappear on the display.

To repeat a selected set of tracks

Select the tracks with programmed playback, then press SHIFT+RANDOM/REPEAT on the remote control to select repeat playback.

It is impossible to play a selected set of tracks in random order.

10

Image 10
Contents Compact Disc Stereo System Installation PrecautionsExplanation of Graphical Symbols Electric PowerTable of Contents Connections are made PreparationsConnection To position the satellite speakersParts and Controls Remote controlMain unit rear Main unit front Disc Direct Play Panel OPEN/CLOSE T-BASS Timer SleepVOLN,M Power Function CD EDIT/CHECK PrgmVolume Adjustments Before OperationsPower DemoAdjusts the brightness of the display ECO modeSetting the clock DimmerPlayback CD OperationsRandom/Repeat playback Programmed playback Blank skip playTo clear a preset station Manual tuningPreset tuning Radio OperationsTo switch the AM tuning interval AdjustmentsTo switch to monaural FM reception Dynamic Integrated Neo AmplifierBasic recording Tape OperationsUse only type I normal tapes Whole tape dubbing Edited CD recordingTo change the program of each side To clear the edit programSuper T-BASS Sound AdjustmentsBBE Graphic equalizerAmbient 2 mode Rear SP modeAmbient 1 mode To cancel Panorama Sound PlusTimer playback Timer OperationsSleep timer To cancel the sleep timerTo change the timer setting Timer recordingTo display the timer setting To cancel the timerTroubleshooting Care and maintenanceReference Specifications For assistance and information United States and Puerto Rico