Whole tape dubbing, Edited CD recording

3Press wREC/REC MUTE to start recording.

When recording a CD, CD playback starts automatically. When recording input from connected equipment, manually start playback of the source.

•Volume or tone adjustment does not affect recording.

•"Can’t REC" is displayed if you attempt to record a tape with the tab broken off.

To stop recording

Press s.

To pause recording (only for TUNER or VIDEO/AUX source)

Press a. Press again to resume.

To record a selected set of tracks from a CD

Program the desired tracks (see "Programmed playback") and then press wREC/REC MUTE.

To record a 4-second blank space (only for TUNER or VIDEO/AUX source)

1Press wREC/REC MUTE during recording or in recording pause mode.

"4" flashes on the display for 4 seconds (a blank space is made in the meantime) and then the unit enters recording pause mode.

To record less than a 4-second blank space, press wREC/ REC MUTE again while "4" flashes.

To record more than a 4-second blank space, press wREC/ REC MUTE again after the unit enters recording pause mode. Each time the button is pressed, a 4 second blank space is added.

2Press ato resume recording.

To erase a tape

1Insert the tape in DECK 2. Set the tape to the desired point if needed.

2Press TAPE to select "TP2".

3Press wREC/REC MUTE.

Whole tape dubbing

1Press TAPE.

2Insert the original tape in DECK 1 and the recording tape in DECK 2.

3Press SYNC DUB.

The tapes are rewound to the beginning of the front side and recording starts.

•Dubbing cannot start from a point halfway in the tape.

•Only one side of the tape can be recorded at a time.

To stop dubbing

Press s.

Edited CD recording

AI Edit Recording

When recording a whole CD, AI Edit Recording takes the length of your tape into account and rearranges the recording order of the tracks if necessary, so that no track is cut short at the end of the side. Prepare a tape long enough to record the CD.

1Insert the recording tape in DECK 2.

2Press CD to select the CD function and load the disc.

3Press CD EDIT/CHECK (SHIFT+CD EDIT/CHECK on the remote control) once.

The "EDIT" indicator lights up and "AI C-00" appears on the display.

4Press DISC DIRECT PLAY 1-3 to select a disc.

5Press the numbered buttons on the remote control to enter the length of the recording tape.

10 to 99 minutes can be specified.

- For a 60-minute tape press 6 and 0.

In a few seconds, the unit determines the tracks to be recorded for each side.

The recording time left for side A appears on the display.

• f, gor MULTI JOG can also be used to specify En tape length.

6Press wREC/REC MUTE to start recording on side A.

The tape is rewound to the beginning of side A and recording starts.

Go to the next step when recording on side A finishes.

7Press CD EDIT/CHECK.

The recording time left for side B appears on the display.

8Turn over the tape and press wREC/REC MUTE to start recording on side B.

•AI Edit Recording cannot be used with discs with more than 30 tracks. "TR OVER" is displayed.

•Recording cannot start from a point halfway in the tape.