TAPE / |
| |
POWER / |
| |
6STANDBY | sMEMORY | |
| ||
MIC VOL | DUBB SPEED HIGH/LOW | |
MIC | ||
| ||
RADIO/ BAND | C | |
CD |
|
CTAPE OPERATION
•Use Type I (normal) tapes only.
•Note that recording is done on only one side of the tape.
INSERTING A TAPE
Press Z to open the cassette holder and insert a tape with the exposed side down and the side to be played facing out.
Deck 1 | Deck 2 |
Push the cassette holder to close.
PLAYING A TAPE
Press c while the power is off.
The power is turned on and play of the inserted tape begins.
The volume level is displayed during tape operation.
Z– Stops play. The power will be automatically turned off.
a– Pauses play. To resume play, press again. f/g – Rewinds/ fast forwards. To stop the
winding, press Z.
Continuous play
After play on deck 2 finishes, play on deck 1 will start without interruption.
During play on deck 2, press a then press c on deck 1.
aon deck 1 will be released at the end of play on deck 2.
RECORDING FROM A CD OR THE
TUNER
1 Insert a tape to be recorded on into deck 1
with the side to be recorded facing out.
Deck 1
2 Get ready to record from the source.
To record from a CD, press CD and load the disc. To record from a radio broadcast, press RADIO/ BAND and tune to a station.
3 Press w on deck 1 to start recording.
cis pressed simultaneously.
When the selected function is CD, CD play and recording starts simultaneously.
To record only the selected tracks of a CD
1Follow steps 1 to 4 of PROGRAMMED PLAY on page 9 to program tracks.
2Press w.
To stop recording, press Z on deck 1. To stop CD play, press s STOP/MEMORY.
To pause recording, press a. To resume recording, press again.
To erase recording, press w on deck 1 while the power is off.
After recording, press TAPE/POWER/6STANDBY to turn the power off.