| A |
|
TAPE / | ePRESET MEMORY s | |
|
| |
POWER / 6STANDBY |
|
|
RADIO/ BAND | rDOWN TUNING | UP t |
|
| |
PHONES | REPEAT/ SLEEP |
|
|
| |
ROCK, POP, JAZZ | FM MODE/OSC |
|
|
| |
QSURROUND |
|
|
| VOLUME N, M |
|
ATUNER OPERATION
1 Press *RADIO/BAND repeatedly to select the desired band.
FM AM
The power is turned on and the previously tuned station is received.
The RADIO indicator lights up.
*or BAND on the remote control (applicable when the AC cord is connected)
2 Press r, t (TUNING DOWN, UP) to select a station.
During FM stereo reception, 
is displayed.
After listening, press TAPE/POWER/6STANDBY to turn the power off.
For better reception
FM 
AM
Extend the rod antenna | The antenna is inside the |
and orient it for the best | unit. Position the unit for |
reception. | the best reception. |
*REPEAT/SLEEP/FM MODE/OSC
-If an FM stereo broadcast contains noise, press the
button so that 
is displayed.
Noise is reduced, although reception is monaural. To restore stereo reception, press the button again.
-If a
* or MODE on the remote control
To change the AM tuning interval
The default setting of the AM tuning interval is 10 kHz/ step. If you use the unit in an area where the frequency allocation system is 9 kHz/step, change the interval as follows.
1Press RADIO/BAND to display FM.
2Press swhile pressing RADIO/BAND to display the AM frequency.
When the AM tuning interval is changed, the preset stations are cleared.
NOTE
If the unit picks up noise from other electrical appliances nearby, like a TV or fluorescent lights, move the unit.
For quick tuning (Auto Search)
Keep r, t pressed until the tuner starts searching for a station. When a station is tuned to, the search stops.
If the broadcast signal is weak, it does not stop. To stop the search manually, press r or t.
To listen with the headphones
Connect headphones with a stereo mini plug to the PHONES jack.