Remote control
Insert two R6 (size AA) batteries.
R6 (AA)
When the reach of the remote control signal is less than 5 meters (16 feet), replace the batteries.
The remote control may not operate correctly when:
-The unit is exposed to intense light, such as direct sunlight
-Objects block the remote control signal to the unit
To use the buttons on the remote control
Buttons on the remote control and the main unit with identical indications have the same functions.
To turn the power on
Press POWER to turn on the display.
When using the unit on the batteries, this button will not turn the power on.
To turn the power off
Press POWER to turn off the display.
When one of the deck operation buttons is pressed, this button will not turn the power off.
To use the FUNCTION button
Each time FUNCTION is pressed while the power is on, the function is selected cyclically.
CD RADIO * TAPE
*applicable when one of the deck operation buttons is pressed
FUNCTION
POWER
En
Maintenance
To clean the cabinet
Use a soft cloth lightly moistened with mild detergent solution. Do not use strong solvents such as alcohol, benzine or thinner.
To clean the heads
When the tape heads are dirty;
-high frequency sound is not emitted
-the sound is not adequately high
-the sound is
-the tape cannot be erased
-the tape cannot be recorded on
After every 10 hours of use, clean the tape heads with a head cleaning cassette.
Use separately sold
Refer to the instructions of the cleaning cassette for details.
To clean the lens | Lens |
Use a cotton swab |
|
slightly moistened with |
|
cleaning fluid. Wipe |
|
gently from the center |
|
to the edge. |
|