Creda S230G installation instructions Connecting to GAS Supply, Cabinets Less than 565mm Deep

Page 30

INSTALLATION INSTRUCTIONS

CONNECTING TO GAS SUPPLY

The oven is designed to be connected with an approved appliance flexible connection to BS 669. A length of 1.25 to 1.55m is recommended. An adaptor backplate should be fitted in the area shown to allow the appliance to be pushed fully back into the cabinet. The flexible hose should be fitted such that it cannot come into contact with moveable parts of the housing unit (e.g. a drawer) and does not pass through a space where it is likely to become trapped or damaged.

The temperature rise of areas at the rear of the appliance that are likely to come in contact with the flexible hose do not exceed 70oC.

CABINETS LESS THAN 565mm DEEP

The appliance can be fitted into a cabinet of minimum depth 550mm providing a suitable connection to the gas supply can be made. The wall behind the appliance will need to be chased away behind the appliance gas inlet. The gas connection can either be made with a flexible hose or 8mm minimum diameter rigid piping, leading below or to the sides of the appliance. Where rigid piping is used, an accessible isolation tap with suitable means of disconnection must be provided to allow for servicing.

200mm

50mm

450mm

630mm

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Europa S230G Creda Answer Centre 08701 54 64 Contents Introduction For Your Safety AlwaysNever Oven Timer Operation Automatic CookingHints on Automatic Cooking Timer Function Buttons Know Your TimerSymbols ClockfaceSetting the Time of DAY Setting the Minute MinderAuto Cooking Programmes Electronic Clock & Automatic Oven Timer Operation Other Notes on Timer Operation Grill PAN & Handle ABCUsing the Grill Cooling FANUsing the TOP Oven TOP Oven Cooking Chart Shelf position 1 is the highestYeast Mixtures Using the Main Oven Main Oven UtensilsMain Oven Operation Cold Start Cooking Using the ‘S’ Setting Main Oven Cooking Chart Small cakes 2 trays Mins Tray Victoria sandwich 2x8 205mm Care and Cleaning Credaclean Oven Liners Main Oven onlyCleaning GRILL, TOP Oven and Main Oven Replacement of the Oven Lamp HOW to Clean the Lamp LensOven Doors Cleaning the Doors Installation Instructions General InstallationFinal Installation VentilationTall Cabinet Ventilation 597mm Connecting to GAS Supply Cabinets Less than 565mm DeepElectrical Connection Connect to a 230-240V A.C. Supply onlyInstallation and Operational Checks Problem Check Something WRONG?Page Page Key Contacts

S230G specifications

The Creda S230G is a versatile and powerful electric storage heater that combines advanced technology with user-friendly features to provide efficient heating solutions for homes and commercial spaces. Designed with a modern aesthetic, the S230G seamlessly integrates into various interior designs while providing optimal warmth and comfort.

One of the standout features of the Creda S230G is its advanced energy storage capability. This heater operates by charging during off-peak energy hours, allowing users to take advantage of lower electricity rates. The unit stores heat in its ceramic bricks, which then gradually release warmth throughout the day, ensuring a consistent and comfortable indoor temperature. This not only promotes energy efficiency but also helps in reducing overall heating costs.

The Creda S230G is equipped with a built-in thermostat that allows for precise temperature control. Users can easily set their desired temperature, and the heater will automatically adjust its output to maintain that level of comfort. Additionally, the S230G features a manual control panel, making it easy to operate and customize heat settings to suit individual preferences.

Another notable technology integrated into the Creda S230G is its adaptive control system. This innovative feature learns the user's heating patterns and preferences over time, optimizing its performance to meet specific needs. This personal touch enhances comfort while ensuring energy is used efficiently, contributing to lower utility bills.

The heater's construction is robust, featuring high-quality materials that ensure durability and longevity. Safety is also a priority, with built-in overheat protection and a thermal cut-out feature designed to prevent potential hazards.

Installation of the Creda S230G is straightforward, making it a practical choice for both new builds and retrofitting projects. The unit can be mounted on walls to save space, and its compact size allows it to fit into various room layouts without being intrusive.

In summary, the Creda S230G stands out as an exceptional electric storage heater. Its energy-efficient design, user-friendly features, adaptive control system, and high-quality construction make it a reliable choice for heating needs. With the capability to provide consistent warmth while optimizing energy usage, the S230G is an ideal solution for those looking to enhance their living or working environment with effective heating technology.
Top Page Image Contents