Creda S230G installation instructions Installation and Operational Checks

Page 32

INSTALLATION INSTRUCTIONS

INSTALLATION AND OPERATIONAL CHECKS

After installation, check for gas soundness. The supply pressure can be checked at the grill injector. Loosen the fastening screw on the left hand side of the grill burner and slide the burner to the right and then off the injector. Ensure that the grill burner is correctly located and the fixing screw tightened on reassembly.

1.Check that the grill burner ignites correctly and burns with a steady flame. Check for a steady flame on the low setting.

2.Check that, with the main oven set to mark 9, the burner ignites at low rate, and then increases to full rate within 60 seconds. Leave the oven full on with the door closed for 10 minutes, and check that when the control is turned to the ‘S’ setting that the flame reduces.

3.Check that, with the top oven set to mark 8, the burner ignites at low rate, and then increases to full rate within 60 seconds. Leave the oven full on with the door closed for 10 minutes, and check that when the control is turned to mark 1 that the flame reduces.

4.Check the operation of the oven timer, oven light(s) & cooling fan.

Instruct the user on operation of the appliance.

.

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Europa S230G Creda Answer Centre 08701 54 64 Contents Introduction For Your Safety AlwaysNever Hints on Automatic Cooking Oven Timer OperationAutomatic Cooking Know Your Timer SymbolsTimer Function Buttons ClockfaceSetting the Time of DAY Setting the Minute MinderAuto Cooking Programmes Electronic Clock & Automatic Oven Timer Operation Other Notes on Timer Operation Grill PAN & Handle ABCUsing the Grill Cooling FANUsing the TOP Oven TOP Oven Cooking Chart Shelf position 1 is the highestYeast Mixtures Main Oven Operation Using the Main OvenMain Oven Utensils Cold Start Cooking Using the ‘S’ Setting Main Oven Cooking Chart Small cakes 2 trays Mins Tray Victoria sandwich 2x8 205mm Cleaning GRILL, TOP Oven and Main Oven Care and CleaningCredaclean Oven Liners Main Oven only Oven Doors Replacement of the Oven LampHOW to Clean the Lamp Lens Cleaning the Doors Installation Instructions Installation Final InstallationGeneral VentilationTall Cabinet Ventilation 597mm Connecting to GAS Supply Cabinets Less than 565mm DeepElectrical Connection Connect to a 230-240V A.C. Supply onlyInstallation and Operational Checks Problem Check Something WRONG?Page Page Key Contacts

S230G specifications

The Creda S230G is a versatile and powerful electric storage heater that combines advanced technology with user-friendly features to provide efficient heating solutions for homes and commercial spaces. Designed with a modern aesthetic, the S230G seamlessly integrates into various interior designs while providing optimal warmth and comfort.

One of the standout features of the Creda S230G is its advanced energy storage capability. This heater operates by charging during off-peak energy hours, allowing users to take advantage of lower electricity rates. The unit stores heat in its ceramic bricks, which then gradually release warmth throughout the day, ensuring a consistent and comfortable indoor temperature. This not only promotes energy efficiency but also helps in reducing overall heating costs.

The Creda S230G is equipped with a built-in thermostat that allows for precise temperature control. Users can easily set their desired temperature, and the heater will automatically adjust its output to maintain that level of comfort. Additionally, the S230G features a manual control panel, making it easy to operate and customize heat settings to suit individual preferences.

Another notable technology integrated into the Creda S230G is its adaptive control system. This innovative feature learns the user's heating patterns and preferences over time, optimizing its performance to meet specific needs. This personal touch enhances comfort while ensuring energy is used efficiently, contributing to lower utility bills.

The heater's construction is robust, featuring high-quality materials that ensure durability and longevity. Safety is also a priority, with built-in overheat protection and a thermal cut-out feature designed to prevent potential hazards.

Installation of the Creda S230G is straightforward, making it a practical choice for both new builds and retrofitting projects. The unit can be mounted on walls to save space, and its compact size allows it to fit into various room layouts without being intrusive.

In summary, the Creda S230G stands out as an exceptional electric storage heater. Its energy-efficient design, user-friendly features, adaptive control system, and high-quality construction make it a reliable choice for heating needs. With the capability to provide consistent warmth while optimizing energy usage, the S230G is an ideal solution for those looking to enhance their living or working environment with effective heating technology.
Top Page Image Contents