Operating Instructions
The Controls of your Wine Cooler
3
1
| 2 | 4 |
|
| |
1. Run |
| 3. °C / °F |
Indicator light illuminates to signify the cooling mode is currently in operation.
Adjacent indicator light denotes which scale of temperature is displayed.
2. Electronic Display
Dispay screen shows current cabinet temperature and set temperature (see ‘Setting the Temperature’ below).
4. ‘UP’ Button
Used to raise (warm) the temperature in 1° degree increments.
‘DOWN’ Button
Used to lower (cool) the temperature in 1° degree increments.
Setting the
Temperature
When you plug in your wine cooler for the first time, the temperatures will automatically be set to 45°F (7°C) and 54°F (12°C) in the left and right compartments respectively and will be displayed in the Fahrenheit scale (°F).
•To switch the display between the Fahrenheit (°F) and Celsius (°C) scale, depress the UP and DOWN control buttons simultaneously for approximately five (5) sec- onds
•The temperature range for both compartments can be set as low as 39°F (4°C) or as high as 64°F (18°C) to suit your specific wine storage requirements. Each depres- sion of the UP or DOWN but- ton will allow you adjust the temperature in 1° degree increments within the afore- mentioned range.
•You may view your ‘set’ tem- perature at any time by briefly depressing either the ‘UP’ or ‘DOWN’ button. The set tem- perature will flash in the dis- play area for 5 seconds before the display resumes showing the current cabinet tempera- ture.
Please note: In the event of a power failure or interruption, all modified settings are lost and the default settings are used once power resumes.
6