FREEZER FEATURES
Your model may have some or all of these features. Features that can be purchased separately as product accessories are labeled with the word “Accessory.” Not all accessories will fit all models. If you are interested in purchasing one of the accessories, please call the
Freezer Shelf
(numberofshelvesvarieswith model)
Style 1
To Remove and Replace the Shelf:
1.Slide the shelf to one side. Tilt the shelf upward to remove the shelf from the support holes. To remove the left side from the support holes, pull the shelf up and to the right.
2.Replace the shelf by inserting the left side of the shelf into the support holes. Lower the right side of the shelf and insert into support holes.
NOTE: Be sure that both sides of the shelf are positioned evenly in the shelf support holes and the shelf is secure.
Style 2
To Remove and Replace the Shelf:
1.Lift the shelf up and off the supports.
2.Replace the shelf by lowering it onto the shelf supports. Be sure that the shelf is securely in place.
Freezer Basket or Bin
(plastic binonsomemodels)
The freezer basket or bin can be used to store bags of frozen fruits and vegetables that may slide off freezer shelves.
To Remove and Replace the Freezer Basket or Bin:
1.Remove basket or bin by sliding it out to the stop.
2.Lift the front of the basket or bin and slide it out the rest of the way.
3.Replace the basket or bin by positioning it on the side wall guide rails. Lift the basket or bin front slightly while pushing it past the guide rail stops and slide basket or bin in the rest of the way.
DOOR FEATURES
Your model may have some or all of these features. Features that can be purchased separately as product accessories are labeled with the word “Accessory.” Not all accessories will fit all models. If you are interested in purchasing one of the accessories, please call the
Door Rails or Bins
The door rails may be removed for easier cleaning.
To Remove and Replace the Rails or Bins:
1.Remove the rails by pushing in slightly on the front of the bracket while pulling out on the inside tab. Repeat these steps for the other end of the rail.
2.Replace the rails by aligning the ends of the brackets with the buttons on the sides of the door liner. Firmly snap bracket and rail assembly onto the tabs above the shelf as shown.
Frozen Food Storage Guide
Storage times will vary according to the quality and type of food, the type of packaging or wrap used (should be airtight and
Put no more unfrozen food into the freezer than will freeze within 24 hours (no more than 2 to 3 lbs of food per cubic foot
[907 to 1,360 g per 28 L] of freezer space). Leave enough space in the freezer for air to circulate around packages. Be sure to leave enough room for the door to close tightly.
For more information on preparing food for freezing, check a freezer guide or reliable cookbook.
Drop-in Door Rails
To Remove and Replace the Rails:
1.Remove the rails by pulling straight up on each end of the rail.
2.Replace the rails by sliding the shelf rail into the slots on the door and pushing the rail straight down until it stops.
41